If a threaded fastener os designated as 1/4" -20 UNC-1A X 3/4", the "1A" means:
Give this one a try later!
Class 1 Fit External Threads
Wrenches may be sized in either the ________ or ________ systems.
,Give this one a try later!
English (SAE), Metric (SI)
A ________ saw is a straight-line handheld saw used for making rough cuts.
Give this one a try later!
Reciprocating
A ________ has a heavy, cylindrical head with two useable striking faces and can weigh as
much as 20 pounds.
Give this one a try later!
Sledgehammer
Which of the following beams has a U-Shaped cross section?
Give this one a try later!
Channel Iron
The ______ point socket and the ________ point socket are the most common found in the
millwright's toolbox.
,Give this one a try later!
6, 12
Which type of hammer does not create sparks when struck against a metal surface?
Give this one a try later!
Dead Blow Hammer
A ________ is a tool that uses hydraulic pressure, pneumatic pressure, or mechanical
force to multiply the force exerted by the operator or compressor to move heavy
objects.
Give this one a try later!
Jack
Which of the following cutting bits has a spring-loaded centering pin?
Give this one a try later!
Hougen Rotabroach
A ________ caliper features an attached jaw and a sliding scale attached to a movable
jaw and a bar marked with English (SAE) or metric (SI) graduations.
, Give this one a try later!
Vernier
The ________ socket has an opening shaped like six-pointed star, an arrangement
designed to proved extra torque or rotational force.
Give this one a try later!
Torx
Each ________ wrench is uniquely designed for use with a particular object.
Give this one a try later!
Spanner
Which of the following is a fixed, measurable, horizontal line from which linear
measurements are taken?
Give this one a try later!
Datum Line
When using an inside micrometer, the millwright must turn the ________ constantly to
move the measuring surface in and out to achieve the correct measurement.
Give this one a try later!
Class 1 Fit External Threads
Wrenches may be sized in either the ________ or ________ systems.
,Give this one a try later!
English (SAE), Metric (SI)
A ________ saw is a straight-line handheld saw used for making rough cuts.
Give this one a try later!
Reciprocating
A ________ has a heavy, cylindrical head with two useable striking faces and can weigh as
much as 20 pounds.
Give this one a try later!
Sledgehammer
Which of the following beams has a U-Shaped cross section?
Give this one a try later!
Channel Iron
The ______ point socket and the ________ point socket are the most common found in the
millwright's toolbox.
,Give this one a try later!
6, 12
Which type of hammer does not create sparks when struck against a metal surface?
Give this one a try later!
Dead Blow Hammer
A ________ is a tool that uses hydraulic pressure, pneumatic pressure, or mechanical
force to multiply the force exerted by the operator or compressor to move heavy
objects.
Give this one a try later!
Jack
Which of the following cutting bits has a spring-loaded centering pin?
Give this one a try later!
Hougen Rotabroach
A ________ caliper features an attached jaw and a sliding scale attached to a movable
jaw and a bar marked with English (SAE) or metric (SI) graduations.
, Give this one a try later!
Vernier
The ________ socket has an opening shaped like six-pointed star, an arrangement
designed to proved extra torque or rotational force.
Give this one a try later!
Torx
Each ________ wrench is uniquely designed for use with a particular object.
Give this one a try later!
Spanner
Which of the following is a fixed, measurable, horizontal line from which linear
measurements are taken?
Give this one a try later!
Datum Line
When using an inside micrometer, the millwright must turn the ________ constantly to
move the measuring surface in and out to achieve the correct measurement.
