TTT1 Latest Update 2025-2026 Actual Exam 125
Questions with 100% Verified Correct Answers
Guaranteed A+ Verified by Professor
A Capstan hoist should be inspected __________ before use? - CORRECT ANSWER:
Daily
A hoist should be designed to withstand a minimum of __________, which is the
maximum intended line pull. - CORRECT ANSWER: 2 times
A vertical life line should have a minimum breaking strength of how many pounds? -
CORRECT ANSWER: 5,000 lbs
According the regulations and standards, there are two levels of maximum Permissible
Exposure. Which group is allowed the highest level of exposure? - CORRECT
ANSWER: Industry Workers
According to industry standards, the minimum height from a lower surface or ground
where fall protection must be used is: - CORRECT ANSWER: 6 feet
All cranes must be inspected __________ by a competent person before use -
CORRECT ANSWER: Daily
An antenna that can transmit a signal up to 360 degrees is called _________. -
CORRECT ANSWER: Omni-Directioinal
An operator uses the following equipment: - CORRECT ANSWER: Winches, Cranes,
and other applicable units
, An overhaul ball provides what function in operations? - CORRECT ANSWER: Provides
weight allowing the load line to return to the ground
At which direction do you install ground rods for a tower? - CORRECT ANSWER:
Parallel with the tower
Can you splice a synthetic sling? - CORRECT ANSWER: Yes, according to the
manufacturer
Demolition work is a rigging class __________? - CORRECT ANSWER: 4
Exposure to nonionizing radiation does what to the human body? - CORRECT
ANSWER: Does not permanently change cells
How do you demolition a tower? - CORRECT ANSWER: Explosive
How is fiber connected to the tower? - CORRECT ANSWER: Rubber grommets and 1
5/8" snap ins
How long is a fire watch for welding? - CORRECT ANSWER: 30 minutes
How many ground rods are required on a site? - CORRECT ANSWER: 3
How many hoisting grips should be installed on a 400' tower? - CORRECT ANSWER: 2
How many slings can you put on a shackle? - CORRECT ANSWER: 4
How often must a fire extinguisher be inspected by a qualified person? - CORRECT
ANSWER: Annually
Questions with 100% Verified Correct Answers
Guaranteed A+ Verified by Professor
A Capstan hoist should be inspected __________ before use? - CORRECT ANSWER:
Daily
A hoist should be designed to withstand a minimum of __________, which is the
maximum intended line pull. - CORRECT ANSWER: 2 times
A vertical life line should have a minimum breaking strength of how many pounds? -
CORRECT ANSWER: 5,000 lbs
According the regulations and standards, there are two levels of maximum Permissible
Exposure. Which group is allowed the highest level of exposure? - CORRECT
ANSWER: Industry Workers
According to industry standards, the minimum height from a lower surface or ground
where fall protection must be used is: - CORRECT ANSWER: 6 feet
All cranes must be inspected __________ by a competent person before use -
CORRECT ANSWER: Daily
An antenna that can transmit a signal up to 360 degrees is called _________. -
CORRECT ANSWER: Omni-Directioinal
An operator uses the following equipment: - CORRECT ANSWER: Winches, Cranes,
and other applicable units
, An overhaul ball provides what function in operations? - CORRECT ANSWER: Provides
weight allowing the load line to return to the ground
At which direction do you install ground rods for a tower? - CORRECT ANSWER:
Parallel with the tower
Can you splice a synthetic sling? - CORRECT ANSWER: Yes, according to the
manufacturer
Demolition work is a rigging class __________? - CORRECT ANSWER: 4
Exposure to nonionizing radiation does what to the human body? - CORRECT
ANSWER: Does not permanently change cells
How do you demolition a tower? - CORRECT ANSWER: Explosive
How is fiber connected to the tower? - CORRECT ANSWER: Rubber grommets and 1
5/8" snap ins
How long is a fire watch for welding? - CORRECT ANSWER: 30 minutes
How many ground rods are required on a site? - CORRECT ANSWER: 3
How many hoisting grips should be installed on a 400' tower? - CORRECT ANSWER: 2
How many slings can you put on a shackle? - CORRECT ANSWER: 4
How often must a fire extinguisher be inspected by a qualified person? - CORRECT
ANSWER: Annually
