Page |1
SUMMARY METAL COILS ENDORSEMENT
(NYS) EXAM 2025| BRAND NEW ACTUAL EXAM
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
What types of commercial vehicles are required to comply with the cargo
securement regulations? - correct answer - trucks, truck tractors, semi-
trailers, full trailers and tractor-pole trailers with a gross vehicle weight
rating of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system
should be expected to withstand when traveling on a curve, ramp or when
changing lanes? - correct answer - The minimum side-to-side or lateral
force = 50% of the cargo weight when traveling on a curve or ramp,
changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide
6,000 lbs. of securement to prevent movement in the rearward direction.
How is this performance criteria expressed in terms of gravity ("g")? -
correct answer - 0.5 g.
What is the definition of Working Load Limit (WLL)? - correct answer - The
maximum load that may be applied to a component of a cargo securement
system during normal service; it is usually assigned by the manufacturer of
the component.
, Page |2
As required by state and federal regulations, who is responsible for proper
load securement? - correct answer - The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how
many miles after beginning a trip? - correct answer - 50 Miles
What is the maximum working load limit of a binder with a handle marked
"3/8-G7, 7/16-G43"? - correct answer - A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
What is the working load limit of unmarked 2-inch synthetic webbing? -
correct answer - 2,000 lbs.
If a metal coil is secured with 3/8-inch chains that do not display a grade
rating, what is the default strength rating assigned to each chain? - correct
answer - 2,650 lbs.
Transportation of one or more metal coils (individually or bundled together)
weighing 5,000 lbs. or more, must comply with which load securement
requirement? - correct answer - Metal coil specific securement rules apply.
Endorsement "M".
SUMMARY METAL COILS ENDORSEMENT
(NYS) EXAM 2025| BRAND NEW ACTUAL EXAM
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
What types of commercial vehicles are required to comply with the cargo
securement regulations? - correct answer - trucks, truck tractors, semi-
trailers, full trailers and tractor-pole trailers with a gross vehicle weight
rating of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system
should be expected to withstand when traveling on a curve, ramp or when
changing lanes? - correct answer - The minimum side-to-side or lateral
force = 50% of the cargo weight when traveling on a curve or ramp,
changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide
6,000 lbs. of securement to prevent movement in the rearward direction.
How is this performance criteria expressed in terms of gravity ("g")? -
correct answer - 0.5 g.
What is the definition of Working Load Limit (WLL)? - correct answer - The
maximum load that may be applied to a component of a cargo securement
system during normal service; it is usually assigned by the manufacturer of
the component.
, Page |2
As required by state and federal regulations, who is responsible for proper
load securement? - correct answer - The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how
many miles after beginning a trip? - correct answer - 50 Miles
What is the maximum working load limit of a binder with a handle marked
"3/8-G7, 7/16-G43"? - correct answer - A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
What is the working load limit of unmarked 2-inch synthetic webbing? -
correct answer - 2,000 lbs.
If a metal coil is secured with 3/8-inch chains that do not display a grade
rating, what is the default strength rating assigned to each chain? - correct
answer - 2,650 lbs.
Transportation of one or more metal coils (individually or bundled together)
weighing 5,000 lbs. or more, must comply with which load securement
requirement? - correct answer - Metal coil specific securement rules apply.
Endorsement "M".
