Active Component - ANSWER The component that is currently active.
Align - ANSWER A tool used to change the position of an object by selecting
the desired position on another object.
Annotations - ANSWER Pieces of text that provide information on parts
within an assembly.
As-Built Joint - ANSWER A tool that uses the current position between
components and defines a motion between those components.
Assembly - ANSWER A collection of components that have defined
relationships with each other and act as a single design.
Base View - ANSWER The default view for a drawing.
Body - ANSWER A 3D shape created from a 2D sketch using modeling
features.
Bottom-Up Assembly - ANSWER A method in which individual components
are created in their own design files and inserted into another design file to be
assembled together.
Boundary Fill - ANSWER A tool used to create, join, or remove volumes in a
design.
Break View - ANSWER A view that shortens long parts with a lot of uniform
geometry to conserve space on the drawing.
Canvas - ANSWER A tool used to place images on selected planar faces or
planes.
, Center Mark - ANSWER An annotation that indicates the location of the
geometric center of a circle or arc.
Center of Mass - ANSWER A command which displays a marker at the center
of mass within a selected object.
Centerline - ANSWER An annotation line that indicates an axis of symmetry.
Coincident Faces - ANSWER A tool used to indicate faces on objects that
touch but do not interfere with each other.
Combine - ANSWER A tool used to create a new body from multiple selected
bodies.
Component - ANSWER A part of an assembly with a unique origin and which
can have motion or a container that houses bodies, sketches, and construction
geometry.
Constraint - ANSWER A limitation on sketch elements used to create
relationships between sketch elements.
Construction Axes - ANSWER Axes used for constructing references for
creating sketches or features for complex 3D models.
Construction Planes - ANSWER Work planes that allow the construction of
2D sketches on complex 3D models.
Counterbore - ANSWER A flat-bottomed enlargement for a hole allowing the
top of a fastener to be flush with the material's surface.
Countersink - ANSWER A conical enlargement for a hole allowing a tapered
fastener to be flush with the material's surface.
Cutting Plane Line - ANSWER A line on a section view that passes through
the object and shows where the object will be cut.
Align - ANSWER A tool used to change the position of an object by selecting
the desired position on another object.
Annotations - ANSWER Pieces of text that provide information on parts
within an assembly.
As-Built Joint - ANSWER A tool that uses the current position between
components and defines a motion between those components.
Assembly - ANSWER A collection of components that have defined
relationships with each other and act as a single design.
Base View - ANSWER The default view for a drawing.
Body - ANSWER A 3D shape created from a 2D sketch using modeling
features.
Bottom-Up Assembly - ANSWER A method in which individual components
are created in their own design files and inserted into another design file to be
assembled together.
Boundary Fill - ANSWER A tool used to create, join, or remove volumes in a
design.
Break View - ANSWER A view that shortens long parts with a lot of uniform
geometry to conserve space on the drawing.
Canvas - ANSWER A tool used to place images on selected planar faces or
planes.
, Center Mark - ANSWER An annotation that indicates the location of the
geometric center of a circle or arc.
Center of Mass - ANSWER A command which displays a marker at the center
of mass within a selected object.
Centerline - ANSWER An annotation line that indicates an axis of symmetry.
Coincident Faces - ANSWER A tool used to indicate faces on objects that
touch but do not interfere with each other.
Combine - ANSWER A tool used to create a new body from multiple selected
bodies.
Component - ANSWER A part of an assembly with a unique origin and which
can have motion or a container that houses bodies, sketches, and construction
geometry.
Constraint - ANSWER A limitation on sketch elements used to create
relationships between sketch elements.
Construction Axes - ANSWER Axes used for constructing references for
creating sketches or features for complex 3D models.
Construction Planes - ANSWER Work planes that allow the construction of
2D sketches on complex 3D models.
Counterbore - ANSWER A flat-bottomed enlargement for a hole allowing the
top of a fastener to be flush with the material's surface.
Countersink - ANSWER A conical enlargement for a hole allowing a tapered
fastener to be flush with the material's surface.
Cutting Plane Line - ANSWER A line on a section view that passes through
the object and shows where the object will be cut.
