DCOM 219 FINAL EXAM NEWEST ACTUAL EXAM NEWEST COMPLETE 250 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS
What are two expected features of modern enterprise networks? (Choose two.) - correct
answer support for converged network traffic
support for critical applications
Which type of information is displayed by the show ip protocols command that is issued from a
router command prompt? - correct answer the configured routing protocols and the networks
that the router is advertising
Which action should be taken when planning for redundancy on a hierarchical network design?
- correct answer add alternate physical paths for data to traverse the network
In the Cisco Enterprise Architecture, which two functional parts of the network are combined to
form a collapsed core design? (Choose two.) - correct answer distribution layer
What are two ways to access a Cisco switch for out-of-band management? (Choose two.) -
correct answer a connection that uses the AUX port*a connection that uses the AUX port
a connection that uses the console port
How can an enterprise network be designed to optimize bandwidth? - correct answer by
organizing the network to control traffic patterns
Refer to the exhibit. Which devices exist in the failure domain when switch S3 loses power? -
correct answer PC_3 and AP_2
As the network administrator you have been asked to implement EtherChannel on the
corporate network. What does this configuration consist of? - correct answer grouping multiple
physical ports to increase bandwidth between two switches
What term is used to express the thickness or height of a switch? - correct answer rack unit
What is the function of ASICs in a multilayer switch? - correct answer They streamline
forwarding of IP packets in a multilayer switch by bypassing the CPU.
Which design feature will limit the size of a failure domain in an enterprise network? - correct
answer the use of the building switch block approach
A network administrator is planning redundant devices and cabling in a switched network to
support high availability. Which benefit will implementing the Spanning Tree Protocol provide
to this design? - correct answer Redundant paths can be available without causing logical Layer
2 loops.
What are two benefits of extending access layer connectivity to users through a wireless
medium? (Choose two.) - correct answer increased flexibility
reduced costs
,DCOM 219 FINAL EXAM NEWEST ACTUAL EXAM NEWEST COMPLETE 250 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS
Which two features of enterprise class equipment assists an enterprise network in maintaining
99.999 percent up-time? (Choose two.) - correct answer failover capabilities
redundant power supplies
A network technician needs to connect a PC to a Cisco network device for initial configuration.
What is required to perform this device configuration? - correct answer terminal emulation
client
What network design would contain the scope of disruptions on a network should a failure
occur? - correct answer the deployment of distribution layer switches in pairs and the division
of access layer switch connections between them
What are three access layer switch features that are considered when designing a network?
(Choose three.)? - correct answer forwarding rate
Power over Ethernet
port density
What are two functions of a router? (Choose two.) - correct answer It connects multiple IP
networks.
It determines the best path to send packets.
What capability is provided by the use of application-specific integrated circuits in Cisco
multilayer switches? - correct answer forwarding of IP packets independent of the CPU
Which statement describes a characteristic of Cisco Meraki switches? - correct answer They are
cloud-managed access switches that enable virtual stacking of switches.
A network engineer is reviewing a network design that uses a fixed configuration enterprise
router that supports both LAN and WAN connections. However, the engineer realizes that the
router does not have enough interfaces to support growth and network expansion. Which type
of device should be used as a replacement? - correct answer a modular router
In which situation would a network administrator install a Cisco Nexus Series or Cisco Catalyst
6500 Series switch to promote infrastructure scalability? - correct answer on a data center
network to provide expansion and transport flexibility
Which statement describes a characteristic of Cisco Catalyst 2960 switches? - correct answer
New Cisco Catalyst 2960-C switches support PoE pass-through.
Refer to the exhibit. Which command was issued on a Cisco switch that resulted in the
exhibited output? - correct answer show port-security address
What is a characteristic of in-band device management? - correct answer It is used to monitor
and make configuration changes to a network device over a network connection.
, DCOM 219 FINAL EXAM NEWEST ACTUAL EXAM NEWEST COMPLETE 250 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS
Which two requirements must always be met to use in-band management to configure a
network device? (Choose two.) - correct answer at least one network interface that is
connected and operational
Telnet, SSH, or HTTP access to the device
When a Cisco IOS device is being selected or upgraded, which option indicates the capabilities
of the Cisco IOS device? - correct answer feature set
Immediately after a router completes its boot sequence, the network administrator wants to
check the routers configuration. From privileged EXEC mode, which of the following commands
can the administrator use for this purpose? (Choose two.) - correct answer show startup-config
show running-config
What is the function of PoE pass-through? - correct answer allows switches, phones, and
wireless access points to receive power over existing Ethernet cables from an upstream switch
A switch is participating in a VTP domain and configured as a VTP server. The switch needs to
propagate VLAN 10 (used by the Manufacturing department) throughout the VTP domain, but
does not have any directly connected hosts using that particular VLAN. Which configuration
would satisfy this requirement? - correct answer vlan 10
name Manufacturing
exit
Which command should the network administrator implement to prevent the transfer of DTP
frames between a Cisco switch and a non-Cisco switch? - correct answer S1(config-if)#
switchport nonegotiate
While configuring inter-VLAN routing on a multilayer switch, a network administrator issues the
no switchport command on an interface that is connected to another switch. What is the
purpose of this command? - correct answer to create a routed port for a single network
What happens to switch ports after the VLAN to which they are assigned is deleted? - correct
answer The ports stop communicating with the attached devices.
Given the following configuration, which two statements are true? (Choose two.)
switch(vlan)# vtp version 2
switch(vlan)# vtp mode server
switch(vlan)# vtp domain Cisco
switch(vlan)# vtp password mypassword - correct answer This switch can send and receive
advertisements from only the Cisco domain.
DETAILED ANSWERS (VERIFIED ANSWERS
What are two expected features of modern enterprise networks? (Choose two.) - correct
answer support for converged network traffic
support for critical applications
Which type of information is displayed by the show ip protocols command that is issued from a
router command prompt? - correct answer the configured routing protocols and the networks
that the router is advertising
Which action should be taken when planning for redundancy on a hierarchical network design?
- correct answer add alternate physical paths for data to traverse the network
In the Cisco Enterprise Architecture, which two functional parts of the network are combined to
form a collapsed core design? (Choose two.) - correct answer distribution layer
What are two ways to access a Cisco switch for out-of-band management? (Choose two.) -
correct answer a connection that uses the AUX port*a connection that uses the AUX port
a connection that uses the console port
How can an enterprise network be designed to optimize bandwidth? - correct answer by
organizing the network to control traffic patterns
Refer to the exhibit. Which devices exist in the failure domain when switch S3 loses power? -
correct answer PC_3 and AP_2
As the network administrator you have been asked to implement EtherChannel on the
corporate network. What does this configuration consist of? - correct answer grouping multiple
physical ports to increase bandwidth between two switches
What term is used to express the thickness or height of a switch? - correct answer rack unit
What is the function of ASICs in a multilayer switch? - correct answer They streamline
forwarding of IP packets in a multilayer switch by bypassing the CPU.
Which design feature will limit the size of a failure domain in an enterprise network? - correct
answer the use of the building switch block approach
A network administrator is planning redundant devices and cabling in a switched network to
support high availability. Which benefit will implementing the Spanning Tree Protocol provide
to this design? - correct answer Redundant paths can be available without causing logical Layer
2 loops.
What are two benefits of extending access layer connectivity to users through a wireless
medium? (Choose two.) - correct answer increased flexibility
reduced costs
,DCOM 219 FINAL EXAM NEWEST ACTUAL EXAM NEWEST COMPLETE 250 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS
Which two features of enterprise class equipment assists an enterprise network in maintaining
99.999 percent up-time? (Choose two.) - correct answer failover capabilities
redundant power supplies
A network technician needs to connect a PC to a Cisco network device for initial configuration.
What is required to perform this device configuration? - correct answer terminal emulation
client
What network design would contain the scope of disruptions on a network should a failure
occur? - correct answer the deployment of distribution layer switches in pairs and the division
of access layer switch connections between them
What are three access layer switch features that are considered when designing a network?
(Choose three.)? - correct answer forwarding rate
Power over Ethernet
port density
What are two functions of a router? (Choose two.) - correct answer It connects multiple IP
networks.
It determines the best path to send packets.
What capability is provided by the use of application-specific integrated circuits in Cisco
multilayer switches? - correct answer forwarding of IP packets independent of the CPU
Which statement describes a characteristic of Cisco Meraki switches? - correct answer They are
cloud-managed access switches that enable virtual stacking of switches.
A network engineer is reviewing a network design that uses a fixed configuration enterprise
router that supports both LAN and WAN connections. However, the engineer realizes that the
router does not have enough interfaces to support growth and network expansion. Which type
of device should be used as a replacement? - correct answer a modular router
In which situation would a network administrator install a Cisco Nexus Series or Cisco Catalyst
6500 Series switch to promote infrastructure scalability? - correct answer on a data center
network to provide expansion and transport flexibility
Which statement describes a characteristic of Cisco Catalyst 2960 switches? - correct answer
New Cisco Catalyst 2960-C switches support PoE pass-through.
Refer to the exhibit. Which command was issued on a Cisco switch that resulted in the
exhibited output? - correct answer show port-security address
What is a characteristic of in-band device management? - correct answer It is used to monitor
and make configuration changes to a network device over a network connection.
, DCOM 219 FINAL EXAM NEWEST ACTUAL EXAM NEWEST COMPLETE 250 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS
Which two requirements must always be met to use in-band management to configure a
network device? (Choose two.) - correct answer at least one network interface that is
connected and operational
Telnet, SSH, or HTTP access to the device
When a Cisco IOS device is being selected or upgraded, which option indicates the capabilities
of the Cisco IOS device? - correct answer feature set
Immediately after a router completes its boot sequence, the network administrator wants to
check the routers configuration. From privileged EXEC mode, which of the following commands
can the administrator use for this purpose? (Choose two.) - correct answer show startup-config
show running-config
What is the function of PoE pass-through? - correct answer allows switches, phones, and
wireless access points to receive power over existing Ethernet cables from an upstream switch
A switch is participating in a VTP domain and configured as a VTP server. The switch needs to
propagate VLAN 10 (used by the Manufacturing department) throughout the VTP domain, but
does not have any directly connected hosts using that particular VLAN. Which configuration
would satisfy this requirement? - correct answer vlan 10
name Manufacturing
exit
Which command should the network administrator implement to prevent the transfer of DTP
frames between a Cisco switch and a non-Cisco switch? - correct answer S1(config-if)#
switchport nonegotiate
While configuring inter-VLAN routing on a multilayer switch, a network administrator issues the
no switchport command on an interface that is connected to another switch. What is the
purpose of this command? - correct answer to create a routed port for a single network
What happens to switch ports after the VLAN to which they are assigned is deleted? - correct
answer The ports stop communicating with the attached devices.
Given the following configuration, which two statements are true? (Choose two.)
switch(vlan)# vtp version 2
switch(vlan)# vtp mode server
switch(vlan)# vtp domain Cisco
switch(vlan)# vtp password mypassword - correct answer This switch can send and receive
advertisements from only the Cisco domain.
