RELIAS RN PHARMACOLOGY
SNSP EXAM 2025 QUESTIONS AND
ORRECT ANSWERS
Which interfaces cannot be configured as WAN interfaces - X0 and MGMT
What is the default configuration of X1 - Static mode with IP of 0.0.0.0
To avoid routing issues of X1 what should you ensure - It's assigned with a valid
non-zero IP address or configuring for DHCP or PPPoE
True or False: It is recommended to disassociate the from the WAN zone if not in
use - True - Unassigned
True or False: You should open HTTPS Mgmt up on the WAN interface - False
True or False: Check the "Add rule to enable redirect from HTTP to HTTPS"
option when configuring HTTPM management - False
What can result from incorrect duplex settings on the WAN - Inconsistent Internet
connection, slow throughput, dropped packets, and inability to negotiate to an ISP
connection
What settings are default on the advanced tab of a WAN interface - Link Speed to
Auto Negotiate
User Default MAC address
Enable Flow Reporting
RELIAS RN PHARMACOLOGY
, RELIAS RN PHARMACOLOGY
Fragment non-VPN outbound packets larger than this Interfaces MTU
MTU stands for what - Maximum Transmission Unit
On DSL and cable connections is the MTU size generally lower or higher - Lower
How do you change the value of MTU - In increments of 8 bytes
True or False: Confirm that Ignore Don't Fragment DF bit is unchecked - True
True or False: Even if you only have 1 WAN connection you should still enable
"Enable Load Balancing" - True
Why must you enable load balancing with only 1 WAN connection - To access the
LB Groups and LB Statistics sections of Failover and Load Balancing
configuration
Which Probe menu should you select when configuring WAN probes - Probe
Succeeds when either main or alternate target responds
Why should you always use X0 as a backup heartbeat link - Because it is
hardcoded in SonicOS
True or False: You should always configure X0's monitoring IP - True
RELIAS RN PHARMACOLOGY
SNSP EXAM 2025 QUESTIONS AND
ORRECT ANSWERS
Which interfaces cannot be configured as WAN interfaces - X0 and MGMT
What is the default configuration of X1 - Static mode with IP of 0.0.0.0
To avoid routing issues of X1 what should you ensure - It's assigned with a valid
non-zero IP address or configuring for DHCP or PPPoE
True or False: It is recommended to disassociate the from the WAN zone if not in
use - True - Unassigned
True or False: You should open HTTPS Mgmt up on the WAN interface - False
True or False: Check the "Add rule to enable redirect from HTTP to HTTPS"
option when configuring HTTPM management - False
What can result from incorrect duplex settings on the WAN - Inconsistent Internet
connection, slow throughput, dropped packets, and inability to negotiate to an ISP
connection
What settings are default on the advanced tab of a WAN interface - Link Speed to
Auto Negotiate
User Default MAC address
Enable Flow Reporting
RELIAS RN PHARMACOLOGY
, RELIAS RN PHARMACOLOGY
Fragment non-VPN outbound packets larger than this Interfaces MTU
MTU stands for what - Maximum Transmission Unit
On DSL and cable connections is the MTU size generally lower or higher - Lower
How do you change the value of MTU - In increments of 8 bytes
True or False: Confirm that Ignore Don't Fragment DF bit is unchecked - True
True or False: Even if you only have 1 WAN connection you should still enable
"Enable Load Balancing" - True
Why must you enable load balancing with only 1 WAN connection - To access the
LB Groups and LB Statistics sections of Failover and Load Balancing
configuration
Which Probe menu should you select when configuring WAN probes - Probe
Succeeds when either main or alternate target responds
Why should you always use X0 as a backup heartbeat link - Because it is
hardcoded in SonicOS
True or False: You should always configure X0's monitoring IP - True
RELIAS RN PHARMACOLOGY
