IET 154 Seimen's NX 9 for Designers questions with
verified answers
a boss feature has a uniform diameter throughout its length Ans✓✓✓-True
A counterbore hole has a uniform diameter throughout its length Ans✓✓✓-False
A datum plane can be selected as the placement face for the boss feature.
Ans✓✓✓-True
a detail view can be generated directly from a model Ans✓✓✓-false
a draft an be placed on the surface body Ans✓✓✓-False
After creating a coordinate system, you cannot modify its location Ans✓✓✓-Fasle
after generating different drawing views, you can align them using the VIEW
ALIGNMENT Ans✓✓✓-true
after invoking the Drafting environment you can change the sheet specifications
Ans✓✓✓-true
Assembly constraints have no relation with the exploded views Ans✓✓✓-true
before creating part balloons it is mandatory to create the parts list of the
assembly Ans✓✓✓-True
, Hole features can be placed on surfaces(sheet bodies). Ans✓✓✓-False
If you choose FINISH SKETCH tool form the DIRECT SKETCH group to exit the
Sketch environment, the modeling environment will be invoked. Ans✓✓✓-True
if you clear the ASSOCIATIVE check box in the SETTINGS rollout of the ASSEMBLY
CONSTRAINTS dialog box and choose the OK button the constraint will not be
applied Ans✓✓✓-true
If you create an associative datum plane, its name will be displayed as FIXED
DATUM PLANE in the PART NAVIGATOR. Ans✓✓✓-False
if you enter ZERO on the INNER DIAMETER edit box, the resulting tube-feature
will be solid filled. Ans✓✓✓-True
In NX how many methods are used to start a new file? Ans✓✓✓-2
In NX you cannot draw a rectangle from its center. Ans✓✓✓-False
In NX, you can create fillets by simply dragging the cursor across the entities that
you want tot fillet. Ans✓✓✓-True
In T-slots, the bottom width value must be greater than the top width value.
Ans✓✓✓-True
verified answers
a boss feature has a uniform diameter throughout its length Ans✓✓✓-True
A counterbore hole has a uniform diameter throughout its length Ans✓✓✓-False
A datum plane can be selected as the placement face for the boss feature.
Ans✓✓✓-True
a detail view can be generated directly from a model Ans✓✓✓-false
a draft an be placed on the surface body Ans✓✓✓-False
After creating a coordinate system, you cannot modify its location Ans✓✓✓-Fasle
after generating different drawing views, you can align them using the VIEW
ALIGNMENT Ans✓✓✓-true
after invoking the Drafting environment you can change the sheet specifications
Ans✓✓✓-true
Assembly constraints have no relation with the exploded views Ans✓✓✓-true
before creating part balloons it is mandatory to create the parts list of the
assembly Ans✓✓✓-True
, Hole features can be placed on surfaces(sheet bodies). Ans✓✓✓-False
If you choose FINISH SKETCH tool form the DIRECT SKETCH group to exit the
Sketch environment, the modeling environment will be invoked. Ans✓✓✓-True
if you clear the ASSOCIATIVE check box in the SETTINGS rollout of the ASSEMBLY
CONSTRAINTS dialog box and choose the OK button the constraint will not be
applied Ans✓✓✓-true
If you create an associative datum plane, its name will be displayed as FIXED
DATUM PLANE in the PART NAVIGATOR. Ans✓✓✓-False
if you enter ZERO on the INNER DIAMETER edit box, the resulting tube-feature
will be solid filled. Ans✓✓✓-True
In NX how many methods are used to start a new file? Ans✓✓✓-2
In NX you cannot draw a rectangle from its center. Ans✓✓✓-False
In NX, you can create fillets by simply dragging the cursor across the entities that
you want tot fillet. Ans✓✓✓-True
In T-slots, the bottom width value must be greater than the top width value.
Ans✓✓✓-True
