CSX CONDUCTOR TRAINING EXAM WITH VERIFIED
ANSWERS: ALREADY RATED A+.
401.7 S/A You must not operate a defective switch, what tasks must be performed when spotting a
defective switch?
1) Report to proper authority
2) Tag as defective
106.1 S/A Illegal use of drugs is prohibited while on duty. At what other times is it prohibited?
1) While off duty
2) When occupying facilities provided by CSX
400.3 Who authorizes an employee to commence work?
Ranking employee
100.4 S/A Before entering, using, or occupying controlled track, each employee must be in possession
of the following?
1) Rulebook specified by system bulletin
2) Timetables, Division, and System Bulletins
300.3 What speed does not exceed 45 mph?
Limited Speed
300.3 What speed does not exceed 30 mph?
Medium Speed
300.3 What speed does not exceed 15mph?
Slow Speed
104.2 T/F Employees must not:
1)Use boisterous, profane, or vulgar language
2) Enter into altercations on duty or on company property
3) Play practical jokes or engage in horseplay
4) Engage in disloyal or dishonest behavior
1) True
2) True
3) True
4) True
406.8 When shoving equipment, the minimum distance you must stop before a switch is?
50'
, 100.1 Employees must know and comply with rules and instructions governing their duty and
instructions of supervisors. When there is uncertainty, employees must do which of the following?
Take the safe course
405.4 When coupling equipment, what speed must not be exceeded?
4mph
100.3 When must the conductor trainee have the current operating manuals available?
Whenever on duty
401.2 S/A Before operating a switch or derail, employees must ensure the following...
1) The device is not locked, clamped, or tagged out of service
2) There are no conflicting movements
4102.1 T/F To move a car with a hot bearing, do not exceed 4mph and cut out the air brakes?
True
5203.1 What percentage of working air brakes are required before departing the yard?
100%
5209.1 What is the minimum brake pipe pressure required for a class 1 brake test?
75 psi
5209.1 you have been called for Q11123. upon reporting, you receive a brake test certificate and have
been advised that the brake tests have been performed using the outbound locomotive. What type of
test is required?
None
5002.1 While en-route, trains must have operating brakes on what percentage of the train?
85%
5101.4 After the air brake tests "no". Before proceeding, what must you make certain of concerning
air pipe pressure at the rear of the train?
Pressure is being restored
5212.1 If you retest a car, how long must the brakes remain applied?
3 minutes
5003.1 When moving a hot bearing car, you must cut out the air brakes on that car. At what other
times would you cut out the air brakes on a car?
If the brake doesn't release when it should
ANSWERS: ALREADY RATED A+.
401.7 S/A You must not operate a defective switch, what tasks must be performed when spotting a
defective switch?
1) Report to proper authority
2) Tag as defective
106.1 S/A Illegal use of drugs is prohibited while on duty. At what other times is it prohibited?
1) While off duty
2) When occupying facilities provided by CSX
400.3 Who authorizes an employee to commence work?
Ranking employee
100.4 S/A Before entering, using, or occupying controlled track, each employee must be in possession
of the following?
1) Rulebook specified by system bulletin
2) Timetables, Division, and System Bulletins
300.3 What speed does not exceed 45 mph?
Limited Speed
300.3 What speed does not exceed 30 mph?
Medium Speed
300.3 What speed does not exceed 15mph?
Slow Speed
104.2 T/F Employees must not:
1)Use boisterous, profane, or vulgar language
2) Enter into altercations on duty or on company property
3) Play practical jokes or engage in horseplay
4) Engage in disloyal or dishonest behavior
1) True
2) True
3) True
4) True
406.8 When shoving equipment, the minimum distance you must stop before a switch is?
50'
, 100.1 Employees must know and comply with rules and instructions governing their duty and
instructions of supervisors. When there is uncertainty, employees must do which of the following?
Take the safe course
405.4 When coupling equipment, what speed must not be exceeded?
4mph
100.3 When must the conductor trainee have the current operating manuals available?
Whenever on duty
401.2 S/A Before operating a switch or derail, employees must ensure the following...
1) The device is not locked, clamped, or tagged out of service
2) There are no conflicting movements
4102.1 T/F To move a car with a hot bearing, do not exceed 4mph and cut out the air brakes?
True
5203.1 What percentage of working air brakes are required before departing the yard?
100%
5209.1 What is the minimum brake pipe pressure required for a class 1 brake test?
75 psi
5209.1 you have been called for Q11123. upon reporting, you receive a brake test certificate and have
been advised that the brake tests have been performed using the outbound locomotive. What type of
test is required?
None
5002.1 While en-route, trains must have operating brakes on what percentage of the train?
85%
5101.4 After the air brake tests "no". Before proceeding, what must you make certain of concerning
air pipe pressure at the rear of the train?
Pressure is being restored
5212.1 If you retest a car, how long must the brakes remain applied?
3 minutes
5003.1 When moving a hot bearing car, you must cut out the air brakes on that car. At what other
times would you cut out the air brakes on a car?
If the brake doesn't release when it should
