NEIEP 800 EXAM:AN A+ GUIDE WITH LATEST KEY
QUESTIONS AND ANSWERS
12
Although typically horizontal in design, the maximum angle of inclination for the moving walk is
______ degrees
115,15
A ________ Volt , ______ amp outlet is required by asme for both the upper and lower truss
True
True or False Water run off must be seperated before the discharge into the public drains
20
For drive motors that require overspeed protection, it must stop the systems if speed exceeds
______ % of rated speed
Torque
The nameplate on the brake must indicate the ________ setting
Drum
The _______ brake is similar to the brake system found on gearless traction elevators
Head end
The drive end of a belted walkway is called the _______ ________
3000
The tensioning device on the tail end of the belted moving walk is normally set at ______ lbs
Crab/circle
The portion of the track system that guides the pallets around the turns are called the ______
tracks
False
True or false The lip track is used to restrain the step chain roller from up and down movement
22
The moving walkway treadway must be at least ______ inches wide
True
QUESTIONS AND ANSWERS
12
Although typically horizontal in design, the maximum angle of inclination for the moving walk is
______ degrees
115,15
A ________ Volt , ______ amp outlet is required by asme for both the upper and lower truss
True
True or False Water run off must be seperated before the discharge into the public drains
20
For drive motors that require overspeed protection, it must stop the systems if speed exceeds
______ % of rated speed
Torque
The nameplate on the brake must indicate the ________ setting
Drum
The _______ brake is similar to the brake system found on gearless traction elevators
Head end
The drive end of a belted walkway is called the _______ ________
3000
The tensioning device on the tail end of the belted moving walk is normally set at ______ lbs
Crab/circle
The portion of the track system that guides the pallets around the turns are called the ______
tracks
False
True or false The lip track is used to restrain the step chain roller from up and down movement
22
The moving walkway treadway must be at least ______ inches wide
True
