NCCER Module 1 (Safety) Questions
with Verified Detailed Correct Answers
latest update 2025
companies with strong safety cultures usually have lower? ---
correct answer ---incident and accident rates
what is a statement regarding safety? --- correct answer ---it's a
learned behavior and attitude
poor lighting, excessive noise, and inadequate guards for moving
parts are examples of? --- correct answer ---unsafe conditions
the activity that consists of breaking a job into its component
tasks and then analyzing each step for potential hazards is called
a? --- correct answer ---job safety analysis JSA
a measure of the probability, consequences, and exposure related
to an event is referred to as? --- correct answer ---Risk
, if there is a hole in the floor or a structure, the preferred method
of protecting workers from falls is to? --- correct answer ---be
guarded with marked flags or covered. (must be clearly marked)
the D-ring or support point on a safety harness should be placed?
--- correct answer ---between the shoulder blades
a personal fall arrest system should be inspected monthly by a? --
- correct answer ---competent person
lanyards that have no shock-absorbing features are used for? ---
correct answer ---positioning and fall restraint.
when placing a ladder against a platform or roof the top of the
ladder should be extended above the point where the ladder
touches the platform or roof by atleast? --- correct answer ---3
feet (0.9 m)
when performing overhead work on scaffolding what protective
measures must be taken to prevent objects from falling and
with Verified Detailed Correct Answers
latest update 2025
companies with strong safety cultures usually have lower? ---
correct answer ---incident and accident rates
what is a statement regarding safety? --- correct answer ---it's a
learned behavior and attitude
poor lighting, excessive noise, and inadequate guards for moving
parts are examples of? --- correct answer ---unsafe conditions
the activity that consists of breaking a job into its component
tasks and then analyzing each step for potential hazards is called
a? --- correct answer ---job safety analysis JSA
a measure of the probability, consequences, and exposure related
to an event is referred to as? --- correct answer ---Risk
, if there is a hole in the floor or a structure, the preferred method
of protecting workers from falls is to? --- correct answer ---be
guarded with marked flags or covered. (must be clearly marked)
the D-ring or support point on a safety harness should be placed?
--- correct answer ---between the shoulder blades
a personal fall arrest system should be inspected monthly by a? --
- correct answer ---competent person
lanyards that have no shock-absorbing features are used for? ---
correct answer ---positioning and fall restraint.
when placing a ladder against a platform or roof the top of the
ladder should be extended above the point where the ladder
touches the platform or roof by atleast? --- correct answer ---3
feet (0.9 m)
when performing overhead work on scaffolding what protective
measures must be taken to prevent objects from falling and
