Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
1. Commercial buildings include facilities for food
False
pro- cessing, manufacturing, refining, mining,
assembly, and other heavy processes.
True or False
2. Multiskilled maintenance personnel have a
False
great amount of expertise in one craft.
True or False
3. Successful maintenancterm-2e personnel
True
practice lifelong learning and continuous
improvement. True or False
4. Networking can only be local (inside the
False
building), with equipment being
monitored within the
location. True or False
5. If a repair does not fix the original problem,
True
then the troubleshooting process resumes by
reevaluating the written lists of symptoms,
causes, and troubleshoot- ing test charts.
True or False
6. Troubleshooting methodically eliminates various
True
sys- tem processes and components as causes
of a mal- function until the malfunction is
located and diag- nosed.
True or False
7. Maintenance technicians are an important part of the True
changeover of equipment to different product lines
1/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
because most problems occur at this
time. True or False
8. PM tasks and frequency for each piece of True
equipment are determined using
manufacturer specifications, equipment
manuals, trade publications, and worker
experience.
True or False
False
9. When arriving on-site to investigate a
problem, the first step is comparing
possible solutions.
True or False
10. The first place to look for specific PM task
recommen- False dations is in the logbook for
each piece of equipment. True or False
11. maintenance is performed to minimize emer- Scheduled
gency work and ensure reliable and
efficient operations.
12. In an industrial facility, downtime due to extremely costly
equipment maintenance or breakdowns can
be .
13. With a consistent flow of accurate operation informa- PM
systems
tion, can help increase efficiency,
reduce costs, and minimize health and safety
problems.
14. Whenever possible, equipment is inspected when it is de-
2/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
energized
.
15. When dealing with an angry customer, . allow them to vent their
frustrations
3/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
16. maintenance is scheduled work required Preventive
to keep equipment in peak operating condition.
17. In some cases, equipment displays include fault codes
or other error indicators.
18. use symbols and interconnecting Flow charts
lines to help a troubleshooter follow a
logical path when solving a problem.
19. systems become more complicated Closed-loop
as the number of Input measurements and the
sensitivity of the controls increase.
20. The is the time just after installation break-in period
when equipment achieves peak operating
performance.
Systems thinking
21. is the consideration of an entire
system and its interrelationships with other
systems while trou- bleshooting.
22. Once a repair is completed, technicians must carefully record the
prob-
lem, causes, and solutions
23. A(n) system is a system in which decisions are Open loop.
made based on only the current state of the
system and a model of how it should work.
24. Automated control systems can activate 25. Effective
, such as sounds, indicator lights, or requires
er- ror codes, if problems arise. active
listening
4/
36
questions well answered to pass graded A+
1. Commercial buildings include facilities for food
False
pro- cessing, manufacturing, refining, mining,
assembly, and other heavy processes.
True or False
2. Multiskilled maintenance personnel have a
False
great amount of expertise in one craft.
True or False
3. Successful maintenancterm-2e personnel
True
practice lifelong learning and continuous
improvement. True or False
4. Networking can only be local (inside the
False
building), with equipment being
monitored within the
location. True or False
5. If a repair does not fix the original problem,
True
then the troubleshooting process resumes by
reevaluating the written lists of symptoms,
causes, and troubleshoot- ing test charts.
True or False
6. Troubleshooting methodically eliminates various
True
sys- tem processes and components as causes
of a mal- function until the malfunction is
located and diag- nosed.
True or False
7. Maintenance technicians are an important part of the True
changeover of equipment to different product lines
1/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
because most problems occur at this
time. True or False
8. PM tasks and frequency for each piece of True
equipment are determined using
manufacturer specifications, equipment
manuals, trade publications, and worker
experience.
True or False
False
9. When arriving on-site to investigate a
problem, the first step is comparing
possible solutions.
True or False
10. The first place to look for specific PM task
recommen- False dations is in the logbook for
each piece of equipment. True or False
11. maintenance is performed to minimize emer- Scheduled
gency work and ensure reliable and
efficient operations.
12. In an industrial facility, downtime due to extremely costly
equipment maintenance or breakdowns can
be .
13. With a consistent flow of accurate operation informa- PM
systems
tion, can help increase efficiency,
reduce costs, and minimize health and safety
problems.
14. Whenever possible, equipment is inspected when it is de-
2/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
energized
.
15. When dealing with an angry customer, . allow them to vent their
frustrations
3/
36
, Final Graduation Test For Maintenance Mechanic
questions well answered to pass graded A+
16. maintenance is scheduled work required Preventive
to keep equipment in peak operating condition.
17. In some cases, equipment displays include fault codes
or other error indicators.
18. use symbols and interconnecting Flow charts
lines to help a troubleshooter follow a
logical path when solving a problem.
19. systems become more complicated Closed-loop
as the number of Input measurements and the
sensitivity of the controls increase.
20. The is the time just after installation break-in period
when equipment achieves peak operating
performance.
Systems thinking
21. is the consideration of an entire
system and its interrelationships with other
systems while trou- bleshooting.
22. Once a repair is completed, technicians must carefully record the
prob-
lem, causes, and solutions
23. A(n) system is a system in which decisions are Open loop.
made based on only the current state of the
system and a model of how it should work.
24. Automated control systems can activate 25. Effective
, such as sounds, indicator lights, or requires
er- ror codes, if problems arise. active
listening
4/
36
