Revit for Architectural Design
Professional Certification Prep fully
solved
1. An architectural designer is creating a wall schedule. The designer only wants to show walls
of the Brick on Metal Stud type. How should this be accomplished?
Sort the schedule by wall Type and deselect Itemize every instance.
Set the Appearance of the schedule to show the Brick on Metal Stud type.
Use conditional formatting based on wall Type equals Brick on Metal Stud.
Filter the schedule by wall Type equals Brick on Metal Stud. - correct answer ✔✔Filter the
schedule by wall Type equals Brick on Metal Stud.
2. An architectural designer has a linked architectural model and wants to place rooms inside of
the link. Revit does not recognize any of the elements as room bounding though. What should
be done?
Enable Room Bounding in the Properties palette for each wall in the link.
Open the link and change the Room Area Computation setting to at wall finish.
Use the Room Separator tool with the Pick Lines option to place room separation lines.
Select the linked architectural model, click Edit Type, and enable Room Bounding. - correct
answer ✔✔Select the linked architectural model, click Edit Type, and enable Room Bounding.
3. An architectural designer is working on a project with a linked Revit model. The designer is
unable to select the link. What is causing this condition?
The Select Links option is disabled.
,A view template is assigned to the view.
The model is in a closed workset.
Another user is borrowing the link. - correct answer ✔✔The Select Links option is disabled.
Where is the leader arrowhead controlled for a text note?
Additional Settings dialog
Arrowhead Type Properties
Text Type Properties
Text Instance Properties - correct answer ✔✔Text Type Properties
An architectural designer needs to create the condition shown in the exhibit. The bottom
extension of the outer brick layer needs to be adjusted independently of the other layers in the
wall. How can this be accomplished?
Add a void extrusion to the wall and then use the Cut Geometry tool.
On the Modify tab, activate the Split Element tool, and split the wall at the brick layer.
In the Edit Assembly dialog, use the Modify tool and unlock the brick layer.
Edit the wall profile and adjust the sketch lines to account for the proper brick offset. - correct
answer ✔✔In the Edit Assembly dialog, use the Modify tool and unlock the brick layer
An architectural designer needs to create a family that can be hosted to a wall or a ceiling.
Which template should be used to create the family?
Generic Model.rft
Generic Model face based.rft
Generic Model ceiling based.rft
, Generic Model wall based.rft - correct answer ✔✔Generic Model face based.rft
An architectural designer is working on a door family. The material for each geometric form
needs to be controlled in the project. How can this be accomplished?
Associate each form's Material parameter to a family parameter that is a Material type of
parameter.
Associate each form's Visible parameter to a family parameter that is a Material type of
parameter.
Create a family parameter that has Material in the name and associate the family to it.
Create a family parameter that is a Material type of parameter and associate the family to it. -
correct answer ✔✔Associate each form's Material parameter to a family parameter that is a
Material type of parameter.
An architectural designer needs to create a detail using detail components. The detail should be
independent of the building model. What type of view should be used?
3D View
Callout View
Drafting View
Section View - correct answer ✔✔Drafting View
An architectural designer has created a drafting view with a detail. The designer wants to use
the detail in another project. Which tool should be used?
Insert Views from File
Link Revit
Insert 2D Elements from File
Professional Certification Prep fully
solved
1. An architectural designer is creating a wall schedule. The designer only wants to show walls
of the Brick on Metal Stud type. How should this be accomplished?
Sort the schedule by wall Type and deselect Itemize every instance.
Set the Appearance of the schedule to show the Brick on Metal Stud type.
Use conditional formatting based on wall Type equals Brick on Metal Stud.
Filter the schedule by wall Type equals Brick on Metal Stud. - correct answer ✔✔Filter the
schedule by wall Type equals Brick on Metal Stud.
2. An architectural designer has a linked architectural model and wants to place rooms inside of
the link. Revit does not recognize any of the elements as room bounding though. What should
be done?
Enable Room Bounding in the Properties palette for each wall in the link.
Open the link and change the Room Area Computation setting to at wall finish.
Use the Room Separator tool with the Pick Lines option to place room separation lines.
Select the linked architectural model, click Edit Type, and enable Room Bounding. - correct
answer ✔✔Select the linked architectural model, click Edit Type, and enable Room Bounding.
3. An architectural designer is working on a project with a linked Revit model. The designer is
unable to select the link. What is causing this condition?
The Select Links option is disabled.
,A view template is assigned to the view.
The model is in a closed workset.
Another user is borrowing the link. - correct answer ✔✔The Select Links option is disabled.
Where is the leader arrowhead controlled for a text note?
Additional Settings dialog
Arrowhead Type Properties
Text Type Properties
Text Instance Properties - correct answer ✔✔Text Type Properties
An architectural designer needs to create the condition shown in the exhibit. The bottom
extension of the outer brick layer needs to be adjusted independently of the other layers in the
wall. How can this be accomplished?
Add a void extrusion to the wall and then use the Cut Geometry tool.
On the Modify tab, activate the Split Element tool, and split the wall at the brick layer.
In the Edit Assembly dialog, use the Modify tool and unlock the brick layer.
Edit the wall profile and adjust the sketch lines to account for the proper brick offset. - correct
answer ✔✔In the Edit Assembly dialog, use the Modify tool and unlock the brick layer
An architectural designer needs to create a family that can be hosted to a wall or a ceiling.
Which template should be used to create the family?
Generic Model.rft
Generic Model face based.rft
Generic Model ceiling based.rft
, Generic Model wall based.rft - correct answer ✔✔Generic Model face based.rft
An architectural designer is working on a door family. The material for each geometric form
needs to be controlled in the project. How can this be accomplished?
Associate each form's Material parameter to a family parameter that is a Material type of
parameter.
Associate each form's Visible parameter to a family parameter that is a Material type of
parameter.
Create a family parameter that has Material in the name and associate the family to it.
Create a family parameter that is a Material type of parameter and associate the family to it. -
correct answer ✔✔Associate each form's Material parameter to a family parameter that is a
Material type of parameter.
An architectural designer needs to create a detail using detail components. The detail should be
independent of the building model. What type of view should be used?
3D View
Callout View
Drafting View
Section View - correct answer ✔✔Drafting View
An architectural designer has created a drafting view with a detail. The designer wants to use
the detail in another project. Which tool should be used?
Insert Views from File
Link Revit
Insert 2D Elements from File
