Revit Certification questions with
verified answers graded A+
Refer to the exhibit. What command was used for the word "Variable" to appear
next to the Structure
Split regions
merge regions
assign layers
modify - correct answer ✔✔split regions
Refer to the exhibit. What combination of parameters do you use to modify the
position of the selected beam from horizontal to slanted?
-zJustification: Slanted Start z Justification: Top Start z Offset Value: 1ʹ0 ʺ [304mm]
-yz Justification: SlantedStart z Justification: BottomStart z Offset Value: 1ʹ0ʺ
[304mm]
-yz Justification: IndependentStart z Justification: TopStart z Offset Value: 1ʹ0 ʺ
[304mm]
-yz Justification: IndependentStart z Justification: BottomStart z Offset Value: 1ʹ0 ʺ
[304mm - correct answer ✔✔D
The boundary of a callout view can be created with which of the following sketch
geometry? (Choose 2.)
,Pick Walls
Ellipse
Line
Pick Lines
Circle - correct answer ✔✔Line,PickLines
Under worksharing display settings, which of the following can you use to base
the color of elements in a view? (Choose 2.)
Borrowers
Worksets
Owners
Phase
Requests - correct answer ✔✔Owners
Worksets
Which command is used to add a recurring detail along a path?
Detail on path
Repeating Detail
Rectangular Array
Instance Detail on Path - correct answer ✔✔Repeating Detail
Refer to the exhibit. How many Instance Parameters does this Type have?
1;2;3;4 - correct answer ✔✔3
, Refer to the exhibit. The sketch of the extrusion is locked to the reference planes it
touches. What happens when you change the value of A to 3ʹ0ʺ?
The extrusion stays in its position.
The extrusion's size is cut by half.
An error shows Constraints are not satisfied.
The B parameter is deleted. - correct answer ✔✔An error shows Constraints are
not satisfied.
You create a wall with a brick layer and a concrete layer. You want to be able to
control the height at which the brick starts. What should you do?
Unlock the brick layer in Section: Modify type attributes, and then change the
base extension of the wall.
Unlock the concrete layer in Section: Modify type attributes, and then change the
base extension of the wall.
Unlock the brick layer in Section: Modify type attributes, and then change the
base offset of the wall.
Unlock the concrete layer in Section: Modify type attributes, and then change the
base offset of the wall. - correct answer ✔✔Unlock the brick layer in Section:
Modify type attributes, and then change the base extension of the wall.
How do you load an existing material library into a Revit project?
In the file menu, click Open, and then click Existing Library.
verified answers graded A+
Refer to the exhibit. What command was used for the word "Variable" to appear
next to the Structure
Split regions
merge regions
assign layers
modify - correct answer ✔✔split regions
Refer to the exhibit. What combination of parameters do you use to modify the
position of the selected beam from horizontal to slanted?
-zJustification: Slanted Start z Justification: Top Start z Offset Value: 1ʹ0 ʺ [304mm]
-yz Justification: SlantedStart z Justification: BottomStart z Offset Value: 1ʹ0ʺ
[304mm]
-yz Justification: IndependentStart z Justification: TopStart z Offset Value: 1ʹ0 ʺ
[304mm]
-yz Justification: IndependentStart z Justification: BottomStart z Offset Value: 1ʹ0 ʺ
[304mm - correct answer ✔✔D
The boundary of a callout view can be created with which of the following sketch
geometry? (Choose 2.)
,Pick Walls
Ellipse
Line
Pick Lines
Circle - correct answer ✔✔Line,PickLines
Under worksharing display settings, which of the following can you use to base
the color of elements in a view? (Choose 2.)
Borrowers
Worksets
Owners
Phase
Requests - correct answer ✔✔Owners
Worksets
Which command is used to add a recurring detail along a path?
Detail on path
Repeating Detail
Rectangular Array
Instance Detail on Path - correct answer ✔✔Repeating Detail
Refer to the exhibit. How many Instance Parameters does this Type have?
1;2;3;4 - correct answer ✔✔3
, Refer to the exhibit. The sketch of the extrusion is locked to the reference planes it
touches. What happens when you change the value of A to 3ʹ0ʺ?
The extrusion stays in its position.
The extrusion's size is cut by half.
An error shows Constraints are not satisfied.
The B parameter is deleted. - correct answer ✔✔An error shows Constraints are
not satisfied.
You create a wall with a brick layer and a concrete layer. You want to be able to
control the height at which the brick starts. What should you do?
Unlock the brick layer in Section: Modify type attributes, and then change the
base extension of the wall.
Unlock the concrete layer in Section: Modify type attributes, and then change the
base extension of the wall.
Unlock the brick layer in Section: Modify type attributes, and then change the
base offset of the wall.
Unlock the concrete layer in Section: Modify type attributes, and then change the
base offset of the wall. - correct answer ✔✔Unlock the brick layer in Section:
Modify type attributes, and then change the base extension of the wall.
How do you load an existing material library into a Revit project?
In the file menu, click Open, and then click Existing Library.
