Basics 2024/2025 Exam Questions and
Correct Answers | New Update
Which interfaces cannot be configured as WAN interfaces - 🧠ANSWER
✔✔X0 and MGMT
What is the default configuration of X1 - 🧠ANSWER ✔✔Static mode with IP
of 0.0.0.0
To avoid routing issues of X1 what should you ensure - 🧠ANSWER ✔✔It's
assigned with a valid non-zero IP address or configuring for DHCP or
PPPoE
True or False: It is recommended to disassociate the from the WAN zone if
not in use - 🧠ANSWER ✔✔True - Unassigned
True or False: You should open HTTPS Mgmt up on the WAN interface -
🧠ANSWER ✔✔False
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
1
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, True or False: Check the "Add rule to enable redirect from HTTP to
HTTPS" option when configuring HTTPM management - 🧠ANSWER
✔✔False
What can result from incorrect duplex settings on the WAN - 🧠ANSWER
✔✔Inconsistent Internet connection, slow throughput, dropped packets,
and inability to negotiate to an ISP connection
What settings are default on the advanced tab of a WAN interface -
🧠ANSWER ✔✔Link Speed to Auto Negotiate
User Default MAC address
Enable Flow Reporting
Fragment non-VPN outbound packets larger than this Interfaces MTU
MTU stands for what - 🧠ANSWER ✔✔Maximum Transmission Unit
On DSL and cable connections is the MTU size generally lower or higher -
🧠ANSWER ✔✔Lower
How do you change the value of MTU - 🧠ANSWER ✔✔In increments of 8
bytes
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
2
PRIVACY STATEMENT. ALL RIGHTS RESERVED