ETCP STUDY GUIDE - OVERVIEW ARENA
RIGGING IAN_LILLY (QUICK REVIEW)
QUESTIONS WITH 100% VERIFIED
ANSWERS!!
1 of 79
Term
A worker falls while attached to a horizontal lifeline. The resulting tension on the
lifeline is 5,000lbs (22.2kN). What is the minimum required anchorage strength?
Give this one a try later!
5,000lbs (22.2kn) 10,000lbs (44.48kN)
20,000lbs (88.96kn) 15,000lbs (66.72kn)
Don't know?
2 of 79
,Term
The web of an I-Beam is the equivalent to what type of structural element on a
truss?
Give this one a try later!
The diagonal Lift Line
Perpendicular to the beam at 30degrees off
White vertical.
Don't know?
3 of 79
Term
Using vectors, what is the resultant force on a point that has 3,000lbs (13.34kN)
horizontal force and a 1,600lb (7.12kN) vertical force?
Give this one a try later!
2,500lbs (11.12kn) 3,400lbs (15.12kN)
1,800lbs (8.01kn) 4,200lbs (18.68kn)
Don't know?
4 of 79
Term
When calculating the Maximum
Allowable Offset between two sheaves,
,you must multiply the Distance between
the two sheaves by what constant value?
Give this one a try later!
.026 .100
.050 .010
Don't know?
5 of 79
Term
What does "STAC" stand for?
Give this one a try later!
Galvanized Aircraft Cable Special Theatrical Alloy Chain
Working Load Limit Lift Line
Don't know?
6 of 79
Term
Formula for Shock Load:
Example: A 200-pound man wearing a safety harness and lanyard falls
6 feet. As he stops, the harness and lanyard stretch 6 inches (or .5
feet). What is the force on him and the rigging that supports him?
Give this one a try later!
, Working Load Limit
Galvanized Aircraft Cable
Force = 200 ×( 6/0.5 +1)
interwoven into a round sling
Force= 200 × (12+1)
(Spanset). Utilized in trussing with
Force = 200 × 13
electrics.
Force = 2,600 pounds
Don't know?
7 of 79
Term
Class 1 Lever
Give this one a try later!
Galvanized Aircraft Cable
interwoven into a round sling
(Spanset). Utilized in trussing with
electrics.
Don't know?
8 of 79
RIGGING IAN_LILLY (QUICK REVIEW)
QUESTIONS WITH 100% VERIFIED
ANSWERS!!
1 of 79
Term
A worker falls while attached to a horizontal lifeline. The resulting tension on the
lifeline is 5,000lbs (22.2kN). What is the minimum required anchorage strength?
Give this one a try later!
5,000lbs (22.2kn) 10,000lbs (44.48kN)
20,000lbs (88.96kn) 15,000lbs (66.72kn)
Don't know?
2 of 79
,Term
The web of an I-Beam is the equivalent to what type of structural element on a
truss?
Give this one a try later!
The diagonal Lift Line
Perpendicular to the beam at 30degrees off
White vertical.
Don't know?
3 of 79
Term
Using vectors, what is the resultant force on a point that has 3,000lbs (13.34kN)
horizontal force and a 1,600lb (7.12kN) vertical force?
Give this one a try later!
2,500lbs (11.12kn) 3,400lbs (15.12kN)
1,800lbs (8.01kn) 4,200lbs (18.68kn)
Don't know?
4 of 79
Term
When calculating the Maximum
Allowable Offset between two sheaves,
,you must multiply the Distance between
the two sheaves by what constant value?
Give this one a try later!
.026 .100
.050 .010
Don't know?
5 of 79
Term
What does "STAC" stand for?
Give this one a try later!
Galvanized Aircraft Cable Special Theatrical Alloy Chain
Working Load Limit Lift Line
Don't know?
6 of 79
Term
Formula for Shock Load:
Example: A 200-pound man wearing a safety harness and lanyard falls
6 feet. As he stops, the harness and lanyard stretch 6 inches (or .5
feet). What is the force on him and the rigging that supports him?
Give this one a try later!
, Working Load Limit
Galvanized Aircraft Cable
Force = 200 ×( 6/0.5 +1)
interwoven into a round sling
Force= 200 × (12+1)
(Spanset). Utilized in trussing with
Force = 200 × 13
electrics.
Force = 2,600 pounds
Don't know?
7 of 79
Term
Class 1 Lever
Give this one a try later!
Galvanized Aircraft Cable
interwoven into a round sling
(Spanset). Utilized in trussing with
electrics.
Don't know?
8 of 79
