CPSI Exam 2025.
Designated play surface - minimum width and length <30 degrees from horizontal
2 in
Force requirements for non-rigid openings (applied to head or torso)
50 lbs
Non-rigid component suspended between two play units or between play unit and ground within 45
degrees of horizontal - minimum height
84 in
Non-rigid component suspended between two play units or between play unit and ground within 45
degrees of horizontal - minimum diameter
1 in
Crush and Shear Probe - for common hazards neoprene rod diameter
0.62 in (5/8")
Ground-level flexible manipulative components - maximum connector length
24 in
Ground-level flexible manipulative play components - max. attachment height
27 in
Head probe - diameter
9 in
Small projection gauge - height
0.25 in
Small projection gauge - inside diameter
0.5 in
Small projection gauge - outside diameter
1 in
Middle Projection Gauge - height
0.75 in
Middle Projection Gauge - inside diameter
1.50 in
Middle projection gauge - outside diameter
, 2 in
Large projection gauge - height
1.5 in
Large Projection Gauge - inside diameter
3 in
Large projection gauge - outside diameter
3.5 in
Partially bounded opening probe - neck length
3 in
Partially bounded opening probe - neck width
1.875 in
Partially bounded opening probe (A) - width
6.1 in
Partially bounded opening probe (B) - shoulder width
9 in
Partially bounded opening probe (B) - thickness
0.75 in
Rope, cable, or chain attached at one end - maximum length allowable
7 in
S-hook - maximum opening
0.04 in
Slide non-entanglement / clearance zone - minimum side clearance
21 in
Suspended members / swing sets - minimum radius
0.25 in
Suspended rope, cable, or chain - minimum inside perimeter of loop
5 in
Torso probe - thickness
3.5 in
Torso probe - width
6.2 in
Designated play surface - minimum width and length <30 degrees from horizontal
2 in
Force requirements for non-rigid openings (applied to head or torso)
50 lbs
Non-rigid component suspended between two play units or between play unit and ground within 45
degrees of horizontal - minimum height
84 in
Non-rigid component suspended between two play units or between play unit and ground within 45
degrees of horizontal - minimum diameter
1 in
Crush and Shear Probe - for common hazards neoprene rod diameter
0.62 in (5/8")
Ground-level flexible manipulative components - maximum connector length
24 in
Ground-level flexible manipulative play components - max. attachment height
27 in
Head probe - diameter
9 in
Small projection gauge - height
0.25 in
Small projection gauge - inside diameter
0.5 in
Small projection gauge - outside diameter
1 in
Middle Projection Gauge - height
0.75 in
Middle Projection Gauge - inside diameter
1.50 in
Middle projection gauge - outside diameter
, 2 in
Large projection gauge - height
1.5 in
Large Projection Gauge - inside diameter
3 in
Large projection gauge - outside diameter
3.5 in
Partially bounded opening probe - neck length
3 in
Partially bounded opening probe - neck width
1.875 in
Partially bounded opening probe (A) - width
6.1 in
Partially bounded opening probe (B) - shoulder width
9 in
Partially bounded opening probe (B) - thickness
0.75 in
Rope, cable, or chain attached at one end - maximum length allowable
7 in
S-hook - maximum opening
0.04 in
Slide non-entanglement / clearance zone - minimum side clearance
21 in
Suspended members / swing sets - minimum radius
0.25 in
Suspended rope, cable, or chain - minimum inside perimeter of loop
5 in
Torso probe - thickness
3.5 in
Torso probe - width
6.2 in
