FDOT EARTHWORK LEVEL 1 EXAM
ACTUAL EXAM WITH VERIFIED
QUESTIONS AND CORRECT
ANSWERS| GUARANTEED
SUCCESS| ACE YOUR GRADES.
What is LIMS? - Correct Answer-Laboratory Info Management
System
The proctor theory is when compaction is achieved how -
Correct Answer-by inputting energy to expel air and water in
the soil voids
Compaction causes - Correct Answer-An increase in unit
weight, decrease in compressibility and permeability.
The proctor is determined where and creates what - Correct
Answer-In a laboratory and establishes a density standard to
,be used on the roadway
Lab proctors are created how - Correct Answer-Material is
gathered from the road and prepared with different amounts
of water then placed in molds and hammered
,What is a modified proctor used in - Correct Answer-It is
used in base, sub grade, MSE wall back fill materials
Modified proctors are created how - Correct Answer-With a
10lb hammer(rammer) on a 18" drop with 56 blows per layers
with 5 layers in total.
What is a standard proctor used in - Correct Answer-It is
used in embankment and structure back fill materials
Standard proctors are created how - Correct Answer-With a
5.5lb hammer(rammer) on a 12" drop with 25 blows per layer
with 3 layers in total
Comparison between VT and QC density test tolerance -
Correct Answer-2 lbs/pcf
What is the STRG - Correct Answer-Sampling, Testing, and
Reporting Guide (state wide)
, Wet density - Correct Answer-is the weight of soil and water
in a volume
Dry density - Correct Answer-weight of soil solids in a
volume
Moisture content - Correct Answer-amount of water in the
soil in the volume
How does moisture react with soil - Correct Answer-acts as a
lubricant permitting maximum densification
Compaction expels air and water causing - Correct Answer-
Increase in unit weight and
Decrease in compressibility and permeability (ability of water
to flow through)
MSE wall stands for - Correct Answer-Mechanically stabilized
ACTUAL EXAM WITH VERIFIED
QUESTIONS AND CORRECT
ANSWERS| GUARANTEED
SUCCESS| ACE YOUR GRADES.
What is LIMS? - Correct Answer-Laboratory Info Management
System
The proctor theory is when compaction is achieved how -
Correct Answer-by inputting energy to expel air and water in
the soil voids
Compaction causes - Correct Answer-An increase in unit
weight, decrease in compressibility and permeability.
The proctor is determined where and creates what - Correct
Answer-In a laboratory and establishes a density standard to
,be used on the roadway
Lab proctors are created how - Correct Answer-Material is
gathered from the road and prepared with different amounts
of water then placed in molds and hammered
,What is a modified proctor used in - Correct Answer-It is
used in base, sub grade, MSE wall back fill materials
Modified proctors are created how - Correct Answer-With a
10lb hammer(rammer) on a 18" drop with 56 blows per layers
with 5 layers in total.
What is a standard proctor used in - Correct Answer-It is
used in embankment and structure back fill materials
Standard proctors are created how - Correct Answer-With a
5.5lb hammer(rammer) on a 12" drop with 25 blows per layer
with 3 layers in total
Comparison between VT and QC density test tolerance -
Correct Answer-2 lbs/pcf
What is the STRG - Correct Answer-Sampling, Testing, and
Reporting Guide (state wide)
, Wet density - Correct Answer-is the weight of soil and water
in a volume
Dry density - Correct Answer-weight of soil solids in a
volume
Moisture content - Correct Answer-amount of water in the
soil in the volume
How does moisture react with soil - Correct Answer-acts as a
lubricant permitting maximum densification
Compaction expels air and water causing - Correct Answer-
Increase in unit weight and
Decrease in compressibility and permeability (ability of water
to flow through)
MSE wall stands for - Correct Answer-Mechanically stabilized
