1
MWS CCRE Complete Questions and Correct
Detailed Answers (Verified Answers)
Question: The purpose of the priming device test is to:
Ans: Evaluate how quickly the priming device can create a vacuum to bring
water through a pumpto the discharge hose.
Question: Identify TWO items that should be included on daily MWS
apparatus records.
Ans: Coolant levels
Question: Traveling at high speeds on a curvy road may cause an MWS
apparatus to:
Ans: Leave the road surface and roll over.
Question: Identify the THREE steps for changing to the left lane on a
limited access highway.
Master01 | 2025/2026 | Latest update
, 2
Ans: 1. Check the side and rear view mirrors.
2. Activate the turn signal.
3. Move the apparatus safely to the left lane.
Question: Identify the FOUR steps for passing through a straight
section of a road or highway.
Ans: 1. Maintain apparatus speed.
2. Check the side streets or roads.
3. Check the side and rear view mirrors.
4. Check for oncoming traffic.
Question: When performing the serpentine exercise, you:
Ans: Should only travel in one direction, without striking the obstruction.
Question: All of the following statements about driving an MWS
apparatus through areas of restricted horizontal and vertical
clearances are true EXCEPT:
Ans: Use the appropriate turn signal.
Master01 | 2025/2026 | Latest update
, 3
Question: The best type of strainer to use in a shallow stream is a:
Ans: Floating strainer.
Question: NFPA rates all fire pumps to meet their capacity from a
draft at:
Ans: 10 feet of lift.
Question: Which equation is used to determine the elevation pressure
loss for resupplying a pumper located approximately 20 feet above the
location of the MWS?
Ans: EP = 0.5x20
Question: The best definition of water pressure is the:
Ans: Force of water per unit area.
Question: All of the following factors must be included when
determining the total pressure loss (TPL) EXCEPT:
Ans: Pump pressure loss
Master01 | 2025/2026 | Latest update
MWS CCRE Complete Questions and Correct
Detailed Answers (Verified Answers)
Question: The purpose of the priming device test is to:
Ans: Evaluate how quickly the priming device can create a vacuum to bring
water through a pumpto the discharge hose.
Question: Identify TWO items that should be included on daily MWS
apparatus records.
Ans: Coolant levels
Question: Traveling at high speeds on a curvy road may cause an MWS
apparatus to:
Ans: Leave the road surface and roll over.
Question: Identify the THREE steps for changing to the left lane on a
limited access highway.
Master01 | 2025/2026 | Latest update
, 2
Ans: 1. Check the side and rear view mirrors.
2. Activate the turn signal.
3. Move the apparatus safely to the left lane.
Question: Identify the FOUR steps for passing through a straight
section of a road or highway.
Ans: 1. Maintain apparatus speed.
2. Check the side streets or roads.
3. Check the side and rear view mirrors.
4. Check for oncoming traffic.
Question: When performing the serpentine exercise, you:
Ans: Should only travel in one direction, without striking the obstruction.
Question: All of the following statements about driving an MWS
apparatus through areas of restricted horizontal and vertical
clearances are true EXCEPT:
Ans: Use the appropriate turn signal.
Master01 | 2025/2026 | Latest update
, 3
Question: The best type of strainer to use in a shallow stream is a:
Ans: Floating strainer.
Question: NFPA rates all fire pumps to meet their capacity from a
draft at:
Ans: 10 feet of lift.
Question: Which equation is used to determine the elevation pressure
loss for resupplying a pumper located approximately 20 feet above the
location of the MWS?
Ans: EP = 0.5x20
Question: The best definition of water pressure is the:
Ans: Force of water per unit area.
Question: All of the following factors must be included when
determining the total pressure loss (TPL) EXCEPT:
Ans: Pump pressure loss
Master01 | 2025/2026 | Latest update
