Soldering Practices Module 1 and 2 Test
The magnification power inspection range for a soldered connection with a land width of
0.35mm is_____. - ✔️✔️7.5X to 10X
Certification once attained belongs to the_________. - ✔️✔️Individual who completed
the training
Adhesive material that is not properly cured is considered ________. - ✔️✔️D1D2D3
A clause of the J-STD-001G that is preceded by the symbol representing the
International Space Station (ISS) indicates ________ . - ✔️✔️That there is a difference
between the base document and the space addendum
If any ESD sensitive devices are used in an assembly, who is responsible for
establishing and implementing a documented ESD program? - ✔️✔️The Manufacturer
Illumination at the surface of workstations should be at least_____. - ✔️✔️1000 lm/m²
All instructors, operators and all inspection personnel __________ be proficient in the
tasks to be performed. - ✔️✔️Shall
A solder connection that exhibits poor wetting and that is characterized by a grayish
porous appearance defines? - ✔️✔️Cold solder connection
The word "shall" in this document invokes a requirement for manufacturers of ________
of product, and failure to comply with the requirement is a noncompliance to this
standard. - ✔️✔️all classes
Certified IPC Specialist Training programs will train, test and certify in the correct
application of the criteria for which class(es) of products? - ✔️✔️All 3 product classes
Recertification of Certified IPC Specialists _____. - ✔️✔️May be administered by any
currently certified Master IPC Trainer or Certified IPC Trainer
Which of the following IPC product classifications would include products where
continued performance and extended life is required, and for which uninterrupted
service is desired but not critical and typically the end-use environment would not cause
failures? - ✔️✔️Class 2- Dedicated Service Electronic Products
The magnification power inspection range for a soldered connection with a land width of
0.35mm is_____. - ✔️✔️7.5X to 10X
Certification once attained belongs to the_________. - ✔️✔️Individual who completed
the training
Adhesive material that is not properly cured is considered ________. - ✔️✔️D1D2D3
A clause of the J-STD-001G that is preceded by the symbol representing the
International Space Station (ISS) indicates ________ . - ✔️✔️That there is a difference
between the base document and the space addendum
If any ESD sensitive devices are used in an assembly, who is responsible for
establishing and implementing a documented ESD program? - ✔️✔️The Manufacturer
Illumination at the surface of workstations should be at least_____. - ✔️✔️1000 lm/m²
All instructors, operators and all inspection personnel __________ be proficient in the
tasks to be performed. - ✔️✔️Shall
A solder connection that exhibits poor wetting and that is characterized by a grayish
porous appearance defines? - ✔️✔️Cold solder connection
The word "shall" in this document invokes a requirement for manufacturers of ________
of product, and failure to comply with the requirement is a noncompliance to this
standard. - ✔️✔️all classes
Certified IPC Specialist Training programs will train, test and certify in the correct
application of the criteria for which class(es) of products? - ✔️✔️All 3 product classes
Recertification of Certified IPC Specialists _____. - ✔️✔️May be administered by any
currently certified Master IPC Trainer or Certified IPC Trainer
Which of the following IPC product classifications would include products where
continued performance and extended life is required, and for which uninterrupted
service is desired but not critical and typically the end-use environment would not cause
failures? - ✔️✔️Class 2- Dedicated Service Electronic Products
