2025/2026. (Answered). 100%
In accordance with specifications, "clearing the fence line" consists of:
A. Removing old Fences
B. Removal and disposal of trees
C. Removing logs and brush
D. All the above
D. All the Above
Typical fence line posts should be set in undisturbed earth by _______.
A. Shoveling
B. Drilling
C. Driving
D. None of the above
D. B or C
Properly stretched fabric won't ___.
A sag
B shrink
C hang
D A or C
D A or B
Installing chain link kennel panels to existing buildings may be done by attaching the panels using:
A lag bolts
B anchors
C tension bands
D any of the above
C tension bands
Posts anchored in concrete may be removed by:
A digging out the posts by hand
B cutting posts at ground level
C twisting the posts out of the foundation
D all the above
D all the above
____ ornamental fence is most widely used material but requires the most maintenance.
A galvanized steel
B welded steel
C aluminum
D welded steel assembled
B welded steel
, ___ ornamental fence systems offer superior corrosion resistance and low maintenance.
A galvanized steel
B welded steel
C aluminum
D welded steel assembled
C aluminum
If corrosion is more of a maintenance concern than strength and rigidity, ___ ornamental fencing
may be your best alternative
A galvanized steel
B welded steel
C aluminum
D welded steel assembled
C aluminum
There should be no __ where ornamental iron is installed onto or through wood.
A fissures
B gaps
C plugs
D none of the above
B gaps
All iron surfaces should be ___ after assembly and installing them into wood posts or rails.
A clear coated
B touched up with rust resistant paint
C sprayed
D A or B
B touched up with rust resistant paint
The difference in hanging wood gates and iron/metal gates is the ___.
A way the wire rod attaches to the gate
B corner gussets
C way the truss rod attaches to the gate
D A and B
D A and B
Hinges may be secured to metal gates ___.
A by welding
B with screws
C with bolts
D all of the above
D all of the above
___ may be used to flush-mount a gate with a narrow gate posts.
A t-hinges
B t-strap hinges