Union Pacific conductor final with verified
solutions already passed
1. What is a length of a track between A. Block
consecutive block signal or between a
block signal and the end of the block
system limit.
A. Block
B. Main
track C
crossing B. Signal aspect
2. What is the appearance of a fixed or cab
signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons C. System general order
3. According to rules hierarchy the system
special instruction can be updated by which
of the follow- ing?
A. Service unit general order
B. General notice
C. System general order C. Controlled signal
4. What is an absolute signal that is controlled
by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
5. Your duties require you to cross through a train or C. Both answers are
correct
1/
56
,Union Pacific conductor final with verified
solutions already passed
a standing cut of cars. After proper
protection is provided and before
crossing over from one side of the
equipment to the other side, you should?
2/
56
,Union Pacific conductor final with verified
solutions already passed
A. Choose equipment carefully, using
cars equipped with a crossover platform
and hand- holds (when available).
B. On equipment where crossover platforms
and handholds are not available, use end of
car struc- tural bracing to maintain 3-
point contact, il sate to do so.
C. Both answers are correct.
6. What is a system of tracks, other than main tracks C. Yard
and sidings, that is used for making up
trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard
7. To enter an area between two adjacent A. Breach
tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone
8. Employees must not get on or off cars and
en- B. Retain a grip with both
hands
gines (whether standing or moving) except when on the handhold until
3/
56
, Union Pacific conductor final with verified
solutions already passed
both feet
required in the performance of duty, and only
4/
56
solutions already passed
1. What is a length of a track between A. Block
consecutive block signal or between a
block signal and the end of the block
system limit.
A. Block
B. Main
track C
crossing B. Signal aspect
2. What is the appearance of a fixed or cab
signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons C. System general order
3. According to rules hierarchy the system
special instruction can be updated by which
of the follow- ing?
A. Service unit general order
B. General notice
C. System general order C. Controlled signal
4. What is an absolute signal that is controlled
by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
5. Your duties require you to cross through a train or C. Both answers are
correct
1/
56
,Union Pacific conductor final with verified
solutions already passed
a standing cut of cars. After proper
protection is provided and before
crossing over from one side of the
equipment to the other side, you should?
2/
56
,Union Pacific conductor final with verified
solutions already passed
A. Choose equipment carefully, using
cars equipped with a crossover platform
and hand- holds (when available).
B. On equipment where crossover platforms
and handholds are not available, use end of
car struc- tural bracing to maintain 3-
point contact, il sate to do so.
C. Both answers are correct.
6. What is a system of tracks, other than main tracks C. Yard
and sidings, that is used for making up
trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard
7. To enter an area between two adjacent A. Breach
tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone
8. Employees must not get on or off cars and
en- B. Retain a grip with both
hands
gines (whether standing or moving) except when on the handhold until
3/
56
, Union Pacific conductor final with verified
solutions already passed
both feet
required in the performance of duty, and only
4/
56
