FDOT ASPHALT PAVING LEVEL 2 EXAM
NEWEST ACTUAL EXAM Questions and
Detailed Verified Answers GRADED A+
Latest Versions 2025
What is the spread rate for the chip spreader? - ✔✔✔
Correct Answer > 0.26 to 0.33 ft/syd
with the actual spread rate determined by the engineerWhat is
the minimum thickness for asphalt being placed over an ARMI
layer? - ✔✔✔ Correct Answer > 1 1/2 inches unless
plans call for a thicker mat
Where should you stick a thermometer in a truck? - ✔✔✔
Correct Answer > The hole should be 1/4 of an inch
In the middle third of the length of the body
and 6 to 10 inches above the bottom of the bed
How much asphalt should be in front of the screed being mixed
by the augers? - ✔✔✔ Correct Answer > The proper
head of material is at the center of the auger shaft
,While the paver is moving the augers should be moving - ✔✔✔
Correct Answer > 80 - 90 % of the time
Screed heaters can not be used to do what - ✔✔✔ Correct
Answer > raise the heat of the mix
When matching paved joints you must have a - ✔✔✔
Correct Answer > Joint matcher ( sonic or shoe paddles)
, The ski pole for the join matcher has to be how long - ✔✔✔
Correct Answer > 25ft
Longitudinal (horizontal when facing down the road) joint
should always be staggered how far apart - ✔✔✔ Correct
Answer > 6 to 12 inches
While paving an unsupported edge the edge can no deviate
more than how far from the string line? - ✔✔✔ Correct
Answer > +/- 1.5"
What are the key components in a pre-construction
conferences? - ✔✔✔ Correct Answer > Agency Input
(FDOT)
Contractor Input (Including the Prime)
Project Personnel (Upper - Middle management)
Testing
Safety
Utilities
Cities or Municipalities (HOA, school boards)
NEWEST ACTUAL EXAM Questions and
Detailed Verified Answers GRADED A+
Latest Versions 2025
What is the spread rate for the chip spreader? - ✔✔✔
Correct Answer > 0.26 to 0.33 ft/syd
with the actual spread rate determined by the engineerWhat is
the minimum thickness for asphalt being placed over an ARMI
layer? - ✔✔✔ Correct Answer > 1 1/2 inches unless
plans call for a thicker mat
Where should you stick a thermometer in a truck? - ✔✔✔
Correct Answer > The hole should be 1/4 of an inch
In the middle third of the length of the body
and 6 to 10 inches above the bottom of the bed
How much asphalt should be in front of the screed being mixed
by the augers? - ✔✔✔ Correct Answer > The proper
head of material is at the center of the auger shaft
,While the paver is moving the augers should be moving - ✔✔✔
Correct Answer > 80 - 90 % of the time
Screed heaters can not be used to do what - ✔✔✔ Correct
Answer > raise the heat of the mix
When matching paved joints you must have a - ✔✔✔
Correct Answer > Joint matcher ( sonic or shoe paddles)
, The ski pole for the join matcher has to be how long - ✔✔✔
Correct Answer > 25ft
Longitudinal (horizontal when facing down the road) joint
should always be staggered how far apart - ✔✔✔ Correct
Answer > 6 to 12 inches
While paving an unsupported edge the edge can no deviate
more than how far from the string line? - ✔✔✔ Correct
Answer > +/- 1.5"
What are the key components in a pre-construction
conferences? - ✔✔✔ Correct Answer > Agency Input
(FDOT)
Contractor Input (Including the Prime)
Project Personnel (Upper - Middle management)
Testing
Safety
Utilities
Cities or Municipalities (HOA, school boards)
