RVIA CERTIFICATION COMPLETE SOLUTIONS (VERIFIED)

RVIA CERTIFICATION COMPLETE
SOLUTIONS (VERIFIED)
-44 - ANSWERWHAT IS THE BOILING POINT OF LP

NO - ANSWERCAN A REGULATOR BE REPLACE

NEVER - ANSWERWHEN DOES ASME TANKS NEED TO BE CERTIFIED


11' W.C. - ANSWERPROPANE OPERATING PRESSURE

14' W.C. - ANSWERMAXIMUM PROPANE PRESSURE AT LOCK UP TEST

25 FT - ANSWERMINIMUM DISTANCE FROM IGNITION SOURCE WHEN FILLING
LP
12 YEARS THEN EVERY 5 - ANSWERWHEN DO DOT TANKS NEED TO BE
CERTIFIED

1 1/2% - ANSWERPERCENTAGE OF PROPANE EXPANSION FOR EVERY 10
DEGREES OVER 70

1.5 - ANSWERWHAT IS THE RATIO WEIGHT OF PROPANE TO AIR

2.14%-9.6% - ANSWERWHAT IS THE RATIO OF LP TO AIR FLAMABILITY

3-5 MINUTES - ANSWERAMOUNT OF TIME FOR PRESSURE TO DROP ON A
REGULATOR LOCK UP TEST

80% - ANSWERFILL CAPASITY OF A DOT TANK

50% - ANSWERAMOUNT OF AVAILABLE BTU DURING OPERATING PRESSURE
TEST

21,548 - ANSWERAMOUNT OF BTU IN POUND OF PROPANE

AMERICAN SOCIETY OF MECHANICAL ENGINEERS - ANSWERWHAT DOES
ASME STAND FOR

DEPARTMENT OF TRANSPORTATION - ANSWERWHAT DOES DOT STANK FOR

GROSS COMBINED WEIGHT RATING - ANSWERWHAT DOES GCWR STAND FOR