Questions and Verified Answers |
Accurate Solutions | Get it 100%
Correct!! | Already Graded A+
During the visual inspection portion of a smog test, the technician notices
that the air pump drive belt has been removed from vehicle. The
Technician should enter the Air system as - 🧠 ANSWER ✔✔A. Missing
The vehicle is equiqqed with aftermarket headers. What is the correct
inspection procedure? - 🧠 ANSWER ✔✔A. check to see if there is a CARB
EO number for the headers
What can cause the Emission inspection System (EIS) to display a "HC
hang-up" message on the screen - 🧠 ANSWER ✔✔B. A dirty inline filter
An active military person is seeking a smog check. the vehicle will not be
registered in CA. Which of the following is true regarding a smog check for
this vehicle ? - 🧠 ANSWER ✔✔A. if the vehicle passes the smog check, a
vehicle inspection report is issued
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
1
STATEMENT. ALL RIGHTS RESERVED
,A vehicle comes in for a smog inspection. The VIN on the registration is 19
characters long. How should the technician enter the VIN number on the
Emission inspection system (EIS) - 🧠 ANSWER ✔✔Enter the last 17
Characters of the VIN
Using the illustration above, Which of the following emission control are
required on the Federally certified 1976 Jeep with a 4.2L engine - 🧠
ANSWER ✔✔A. PCV, TAC, EVP, EGR, SPK
how long must the station keep records pertaining to smog check and or
repairs to be available for the BAR to inspect and or copy - 🧠 ANSWER
✔✔B. 3 years
When a specially constructed (SPCN) vehicle is in the smog station for a
biennial inspection, what vehicle make should be entered in the EIS
machine - 🧠 ANSWER ✔✔A. The SPCN make
Which of the following vehicle does not need a BAR label? - 🧠 ANSWER
✔✔D. Cars with an engine that has been changed but was offered that
year for that model by the manufacturer
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
2
STATEMENT. ALL RIGHTS RESERVED
, The technician notices that the dipstick is missing. How should he/she
enter this finding into the Emission inspection System (EIS) - 🧠 ANSWER
✔✔C. The PCV is missing
Upon performing a visual inspection, the technician notices that the EGR
vacuum hose has crack in it. How should the technician enter this finding
into the Emission inspection system (EIS) - 🧠 ANSWER ✔✔D. Enter the
EGR system as Defective.
While conducting a visual inspection, the technician notices the purge hose
is there but is not attached to the EVAP canister. how should the technician
enter this into the Emission inspection System (EIS) - 🧠 ANSWER ✔✔A.
The EVAP as disconnected
What is technician's obligation if he/she selects "other" as the reason for an
inspection abort ? - 🧠 ANSWER ✔✔B. Document the reason for the abort
on all copies of the VIR
The technician is going to conduct the gas cap functional test but there is
no gas cap on the vehicle. How should the technician enter this finding into
the EIS - 🧠 ANSWER ✔✔D. Enter the EVAP as missing
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
3
STATEMENT. ALL RIGHTS RESERVED