Answers
What is the time constant for a circuit with 150KOhms and a 2
microfarad capacitor? -
correct answer ✅.3 seconds
What must be done before checking pump drive belts on a
hydraulic elevator -
correct answer ✅Pull the main disconnect switch
Which of the following best describes the danger posed be the
counterweight assembly when you are riding the car top? -
correct answer ✅It run close by in the opposite direction
Why must you place a hydraulic elevator car on jack posts before
servicing the packing head? -
correct answer ✅Because a hydraulic elevator is supported by a
column of oil.
Why can't Elevator Constructors use a metal ladder? -
correct answer ✅Metal ladders conduct electricity
,Mechanics NEIEP Exam Questions And
Answers
What is the function of a Ground Fault Circuit Interrupter? -
correct answer ✅To detect and imbalance in current between the
hot and nuetral wires
How do you determine the correct angle from the vertical for
placing a ladder -
correct answer ✅Measure out a distance of 1/4 the height.
Who is required to furnish you the necessary safety equipment? -
correct answer ✅Your employer
What device must be in working condition in order to use an
elevator car sling as a running platform -
correct answer ✅The governor and safeties.
What hazardous condition can occur if the weight of the temporary
car and counterweight are not kept nearly equal? -
correct answer ✅Traction could be lost
What is the name of the document that lists the hazards of a
substance? -
correct answer ✅Material Safety Data Sheet or Safety Data Sheet
,Mechanics NEIEP Exam Questions And
Answers
Who is responsible for making sure barricades are kept in place? -
correct answer ✅Everyone on the job
Who is primarily responsible for your safety on the job? -
correct answer ✅You, Yourself
Which agency guarantees your right to a safe workplace? -
correct answer ✅OSHA
Which of the following is not a typical elevator repair? -
correct answer ✅
Which of the following makes a good substitute for a ladder? -
correct answer ✅Never substitute anything
How should you proceed to et a toolbox to the machine room when
climbing a vertical ladder? -
correct answer ✅Climb the ladder and pull the box up with a rope
, Mechanics NEIEP Exam Questions And
Answers
What is the safest way to lubricate hoist ropes? -
correct answer ✅With a rope lubricator
What supports a hydraulic elevator? -
correct answer ✅The column of oil inside the jack
What is the first thing you must do before performing any service
on an elevator -
correct answer ✅Place barricades at the upper and lower ends
When a roller bearing needs to be pressed onto a shaft, what type
of allowance does the shaft have? -
correct answer ✅Negative allowance
How are threads specified on metric bolts? -
correct answer ✅
What is the tolerance accepted in the elevator industry? -
correct answer ✅+- 1/64