TFM02 - FEL B Exam Questions and Correct Answers
(100%COMPLETE ANSWERS) ALREADY GRADED A+
100% satisfaction guaranteed
What hazards does a Class D Fire Extinguisher Protect? - ANSWER-Class D fires are fires in combustible
metals, such as magnesium, titanium, zirconium, sodium, lithium, and potassium.
What hazards does a Class K Fire Extinguisher Protect? - ANSWER-Class k fires are fires in cooking
appliances that involve combustible cooking media (vegetable or animal oils and fats.
Use of halon agent fire extinguishers shall be limited to applications where a ______ _______ is
necessary to extinguish fire efficiently without damaging the equipment. - ANSWER-Clean Agent
Wheeled fire extinguishers shall be considered for hazard protection in areas in which a fire risk
assessment has shown _______. - ANSWER-High hazard areas are present.
Wheeled Fire extinguishers has the following features: - ANSWER-1. High agent flow rate
2. Increased agent stream range
3. Increased agent capacity
Extinguishers for Pressurized Liquid and Pressurized Gas fires: - ANSWER-Large-capacity dry chemical
extinguishers of 10 lb or greater and with a discharge rate of 1 lb/sec or more shall be selected to
protect these hazards.
Extinguishers for Three-Dimensional Fires - ANSWER-Large-capacity dry chemical extinguishers of 10 lb
or greater and with a discharge rate of 1lb/sec or more shall be selected to protect these hazards.
Fire extinguishers having a gross weight not exceeding 40lb shall be installed so that the top of the fire
extinguisher is not more than __ ft above the floor - ANSWER-5
FIre extinguishers having a gross weight greater than 40 lb (except whelled types) shall be installed so
that the top of the fire extinguisher is not more than __ ft above the floor - ANSWER-3 1/2 feet
, Hazardous materials identification systems (HMIS) labels, 6-year maintenance labels, hydrostatic test
labels, or other labels, shall not be located or placed on the _____ of the extinguisher. - ANSWER-Front
Cabinets housing fire extinguishers shall not be locked except for - ANSWER-Fire extinguishers are
subject to malicious use and cabinets include a means of emergency access.
Class A fire extinguishers shall be located so that the maximum travel distances shall not exceed __ feet.
- ANSWER-75 feet
Class B fire extinguishers shall be located so that the maximum travel distances shall be as followed -
ANSWER-Light Hazard 5-B/10-b 30ft/50ft
Ordinary Hazard 10-B/20-B 30ft/50ft
Extra Hazard 40-B/80-B 30ft/50ft
Up to _____ AFFF or FFFP fire extinguishers of at least 2 1/2 gal capacity shall be permitted to be used to
fulfill extra hazard requirements. - ANSWER-Three
____ AFFF or FFFP fire extinguishers of at least 1.6 gal capacity shall be permitted to be used to fulfill
ordinary hazard requirements. - ANSWER-Two
Class K Fire Extinguishers shall be located so that the maximum travel distances shall not exceed __ ft
from the hazard to the extinguishers. - ANSWER-30 Feet
Class D Fire Extinguishers shall be located not more than __ ft of travel distance from the Class D hazard.
- ANSWER-75
Fire extinguishers removed from service shall be _______ replaced with extinguishers that are suitable
for the type of hazard being protected and shall be of at least equal rating. - ANSWER-immediately
Stored-pressure types of fire extinguishers containing a loaded stream agent shall be disassembled on
an _____ basis and subjected to complete maintenance. - ANSWER-Annual
(100%COMPLETE ANSWERS) ALREADY GRADED A+
100% satisfaction guaranteed
What hazards does a Class D Fire Extinguisher Protect? - ANSWER-Class D fires are fires in combustible
metals, such as magnesium, titanium, zirconium, sodium, lithium, and potassium.
What hazards does a Class K Fire Extinguisher Protect? - ANSWER-Class k fires are fires in cooking
appliances that involve combustible cooking media (vegetable or animal oils and fats.
Use of halon agent fire extinguishers shall be limited to applications where a ______ _______ is
necessary to extinguish fire efficiently without damaging the equipment. - ANSWER-Clean Agent
Wheeled fire extinguishers shall be considered for hazard protection in areas in which a fire risk
assessment has shown _______. - ANSWER-High hazard areas are present.
Wheeled Fire extinguishers has the following features: - ANSWER-1. High agent flow rate
2. Increased agent stream range
3. Increased agent capacity
Extinguishers for Pressurized Liquid and Pressurized Gas fires: - ANSWER-Large-capacity dry chemical
extinguishers of 10 lb or greater and with a discharge rate of 1 lb/sec or more shall be selected to
protect these hazards.
Extinguishers for Three-Dimensional Fires - ANSWER-Large-capacity dry chemical extinguishers of 10 lb
or greater and with a discharge rate of 1lb/sec or more shall be selected to protect these hazards.
Fire extinguishers having a gross weight not exceeding 40lb shall be installed so that the top of the fire
extinguisher is not more than __ ft above the floor - ANSWER-5
FIre extinguishers having a gross weight greater than 40 lb (except whelled types) shall be installed so
that the top of the fire extinguisher is not more than __ ft above the floor - ANSWER-3 1/2 feet
, Hazardous materials identification systems (HMIS) labels, 6-year maintenance labels, hydrostatic test
labels, or other labels, shall not be located or placed on the _____ of the extinguisher. - ANSWER-Front
Cabinets housing fire extinguishers shall not be locked except for - ANSWER-Fire extinguishers are
subject to malicious use and cabinets include a means of emergency access.
Class A fire extinguishers shall be located so that the maximum travel distances shall not exceed __ feet.
- ANSWER-75 feet
Class B fire extinguishers shall be located so that the maximum travel distances shall be as followed -
ANSWER-Light Hazard 5-B/10-b 30ft/50ft
Ordinary Hazard 10-B/20-B 30ft/50ft
Extra Hazard 40-B/80-B 30ft/50ft
Up to _____ AFFF or FFFP fire extinguishers of at least 2 1/2 gal capacity shall be permitted to be used to
fulfill extra hazard requirements. - ANSWER-Three
____ AFFF or FFFP fire extinguishers of at least 1.6 gal capacity shall be permitted to be used to fulfill
ordinary hazard requirements. - ANSWER-Two
Class K Fire Extinguishers shall be located so that the maximum travel distances shall not exceed __ ft
from the hazard to the extinguishers. - ANSWER-30 Feet
Class D Fire Extinguishers shall be located not more than __ ft of travel distance from the Class D hazard.
- ANSWER-75
Fire extinguishers removed from service shall be _______ replaced with extinguishers that are suitable
for the type of hazard being protected and shall be of at least equal rating. - ANSWER-immediately
Stored-pressure types of fire extinguishers containing a loaded stream agent shall be disassembled on
an _____ basis and subjected to complete maintenance. - ANSWER-Annual
