Grand Central 201 Admin 2024/2025
Exam Questions and Answers 100%
Guaranteed Success | Already Rated A+
Create and Configure Facility Structure: Configure departments to show the
Hospital Accounts form - 🧠ANSWER ✔✔These settings are found in
Hyperspace > Registration/Grand Central System Definitions > Service
Area > Hospital Account Settings. By clicking Dept Settings and selecting
the departments, it sets an item in the department record.
Which of the following units require the Unit Type Field to be set? -
🧠ANSWER ✔✔Hospital OutPatient - Unit Type is required for any of the
specialty units listed in the options, such as Hospital Outpatient. If this
setting is blank for certain specialty units, they won't fully function.
Create and Configure Facility Structure: Configure a bed to show pertinent
information to bed planners - 🧠ANSWER ✔✔In Bed Board: Always include
This bed will appear in Bed Planning whether it is occupied or unoccupied.
In Census: Yes
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
1
PRIVACY STATEMENT. ALL RIGHTS RESERVED
,This bed is included in census statistics reporting.
Create and Configure Facility Structure: Attaching two revenue locations to
the same parent revenue location can allow them to share hospital
accounts across revenue locations - 🧠ANSWER ✔✔True
Create and Configure Facility Structure: On which screen in the department
master file can you specify that the department is an HOD? - 🧠ANSWER
✔✔ADT Unit/Department Settings
Unit Type: Hospital Outpatient.
Create and Configure Facility Structure:
An organization has one service area with several hospitals. Hospital A and
B need a setting configured one way. Hospital C, Hospital D, Hospital E,
and Hospital F need the same setting configured a different way. This
setting is available at the department, revenue location, service area, and
facility levels. Given this information, which records should you edit to
configure the settings that all hospitals get what they need? Configure the
setting in the fewest number of records possible. Choose ALL answers that
apply.
A. Hospital A-B
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
2
PRIVACY STATEMENT. ALL RIGHTS RESERVED
,B. Hospital C-F
C. The service area
D. The facility - 🧠ANSWER ✔✔D. The facility (for the majority's setting)
and A. Hospital A-B (for the overrides). Though SA could be an option, it
would be best if it is set at the most general level (Facility) in case the
organization creates new service areas so that it will NOT need to be reset
at that additional service area.
Create and Configure Facility Structure:
The parent revenue location is the lowest level of the facility structure for
reporting for hospital billing AR, payments, adjustments and refunds. -
🧠ANSWER ✔✔True
Create and Configure Facility Structure:
List the setting that determines where a unit appears in Bed Administration
- 🧠ANSWER ✔✔If you leave the Parent Hospital/ Clinic Area field blank,
you won't find your unit in Bed Administration, a Hyperspace tool used to
build and maintain rooms and beds
Grand Central Settings Overview: Define the rule of specificity -
🧠ANSWER ✔✔If a setting is configured at multiple levels of the setting's
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
3
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, hierarchy, the system uses the most specific level's setting. If nothing is set
at that level, the system looks to the next most specific level's setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
Unit Managers: Identify the type of record that controls highlighting on unit
managers - 🧠ANSWER ✔✔VIEW RECORD
Unit Managers: Configure the unit manager to display specific beds. -
🧠ANSWER ✔✔Care Area
The care area determines which beds and patients a Unit Manager shows.
It also determines what options appear to users when they right-click a bed
or patient.
Unit Managers: Identify where View records records are used - 🧠ANSWER
✔✔They are used in the Unit Manager Configuration
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
4
PRIVACY STATEMENT. ALL RIGHTS RESERVED
Exam Questions and Answers 100%
Guaranteed Success | Already Rated A+
Create and Configure Facility Structure: Configure departments to show the
Hospital Accounts form - 🧠ANSWER ✔✔These settings are found in
Hyperspace > Registration/Grand Central System Definitions > Service
Area > Hospital Account Settings. By clicking Dept Settings and selecting
the departments, it sets an item in the department record.
Which of the following units require the Unit Type Field to be set? -
🧠ANSWER ✔✔Hospital OutPatient - Unit Type is required for any of the
specialty units listed in the options, such as Hospital Outpatient. If this
setting is blank for certain specialty units, they won't fully function.
Create and Configure Facility Structure: Configure a bed to show pertinent
information to bed planners - 🧠ANSWER ✔✔In Bed Board: Always include
This bed will appear in Bed Planning whether it is occupied or unoccupied.
In Census: Yes
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
1
PRIVACY STATEMENT. ALL RIGHTS RESERVED
,This bed is included in census statistics reporting.
Create and Configure Facility Structure: Attaching two revenue locations to
the same parent revenue location can allow them to share hospital
accounts across revenue locations - 🧠ANSWER ✔✔True
Create and Configure Facility Structure: On which screen in the department
master file can you specify that the department is an HOD? - 🧠ANSWER
✔✔ADT Unit/Department Settings
Unit Type: Hospital Outpatient.
Create and Configure Facility Structure:
An organization has one service area with several hospitals. Hospital A and
B need a setting configured one way. Hospital C, Hospital D, Hospital E,
and Hospital F need the same setting configured a different way. This
setting is available at the department, revenue location, service area, and
facility levels. Given this information, which records should you edit to
configure the settings that all hospitals get what they need? Configure the
setting in the fewest number of records possible. Choose ALL answers that
apply.
A. Hospital A-B
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
2
PRIVACY STATEMENT. ALL RIGHTS RESERVED
,B. Hospital C-F
C. The service area
D. The facility - 🧠ANSWER ✔✔D. The facility (for the majority's setting)
and A. Hospital A-B (for the overrides). Though SA could be an option, it
would be best if it is set at the most general level (Facility) in case the
organization creates new service areas so that it will NOT need to be reset
at that additional service area.
Create and Configure Facility Structure:
The parent revenue location is the lowest level of the facility structure for
reporting for hospital billing AR, payments, adjustments and refunds. -
🧠ANSWER ✔✔True
Create and Configure Facility Structure:
List the setting that determines where a unit appears in Bed Administration
- 🧠ANSWER ✔✔If you leave the Parent Hospital/ Clinic Area field blank,
you won't find your unit in Bed Administration, a Hyperspace tool used to
build and maintain rooms and beds
Grand Central Settings Overview: Define the rule of specificity -
🧠ANSWER ✔✔If a setting is configured at multiple levels of the setting's
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
3
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, hierarchy, the system uses the most specific level's setting. If nothing is set
at that level, the system looks to the next most specific level's setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
Unit Managers: Identify the type of record that controls highlighting on unit
managers - 🧠ANSWER ✔✔VIEW RECORD
Unit Managers: Configure the unit manager to display specific beds. -
🧠ANSWER ✔✔Care Area
The care area determines which beds and patients a Unit Manager shows.
It also determines what options appear to users when they right-click a bed
or patient.
Unit Managers: Identify where View records records are used - 🧠ANSWER
✔✔They are used in the Unit Manager Configuration
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
4
PRIVACY STATEMENT. ALL RIGHTS RESERVED
