1|Page
WELDING PRINT READING EXAM 2025| BRAND NEW
ACTUAL EXAM WITH 100% VERIFIED QUESTIONS
AND CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
The main purpose of drawings in the welding industry is to -
(answer)communicate ideas in graphic or picture form
Drawings today are usually created using - (answer)CAD techniques
A type of computer output device that works based on electrostatic principles is
the - (answer)laser printer
Which type of drawing can be used to test prototypes and assemblies? -
(answer)CAD drawing
Which of the following are not included on a welding print? -
(answer)photographs
Another term for xerography is - (answer)electrostatic process
The electrostatic process relies on the principles that - (answer)opposite charges
attract and like charges repel
,2|Page
Which reproduction process consists of making a tracing, developing and fixing a
print, and then washing and drying the print? - (answer)Blueprint process
Which type of computer output device mimics the motion that a human hand
might make while drawing? - (answer)Pen plotter
Which reproduction technique was originally developed to reduce the storage
needed for original drawings? - (answer)Microfilm process
Another term for a print of an original drawing is - (answer)Reproduction
The lines and figures that have specific meanings in welding drawings to
accurately describe the shape, size, material, finish, and fabrication of an object
are - (answer)symbols
Even though the actual process is not used much anymore, the term _______ is
commonly used to refer to prints made by any process - (answer)blue print
A machining system that uses information from CAD drawings to produce parts
and assemblies is a _______ system - (answer)CAM
An inexpensive computer output device that may be small enough to fit on a
desktop is a _______ printer - (answer)inkjet
, 3|Page
Print created from a microfilm negative - (answer)Blow-back
Reproduction technique that uses an electrostatic charge to duplicate an original -
(answer)Xerography
General term for a duplicate of an original drawing - (answer)Print
Reproduction on which dark lines are printed on a white background -
(answer)White print
Lines and figures that have specific meanings on a drawing - (answer)Symbols
To convert a common fraction to a decimal fraction, you would - (answer)divide
the numerator by the denominator
A metric rule is graduated in - (answer)millimeters
The decimal fraction equivalent of 3/4 inch is - (answer).75
One millimeter is equal to ______ of a meter - (answer)1/1000
When no number can be divided evenly into both the numerator and the
denominator of a fraction, the fraction is said to be - (answer)in lowest terms
WELDING PRINT READING EXAM 2025| BRAND NEW
ACTUAL EXAM WITH 100% VERIFIED QUESTIONS
AND CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
The main purpose of drawings in the welding industry is to -
(answer)communicate ideas in graphic or picture form
Drawings today are usually created using - (answer)CAD techniques
A type of computer output device that works based on electrostatic principles is
the - (answer)laser printer
Which type of drawing can be used to test prototypes and assemblies? -
(answer)CAD drawing
Which of the following are not included on a welding print? -
(answer)photographs
Another term for xerography is - (answer)electrostatic process
The electrostatic process relies on the principles that - (answer)opposite charges
attract and like charges repel
,2|Page
Which reproduction process consists of making a tracing, developing and fixing a
print, and then washing and drying the print? - (answer)Blueprint process
Which type of computer output device mimics the motion that a human hand
might make while drawing? - (answer)Pen plotter
Which reproduction technique was originally developed to reduce the storage
needed for original drawings? - (answer)Microfilm process
Another term for a print of an original drawing is - (answer)Reproduction
The lines and figures that have specific meanings in welding drawings to
accurately describe the shape, size, material, finish, and fabrication of an object
are - (answer)symbols
Even though the actual process is not used much anymore, the term _______ is
commonly used to refer to prints made by any process - (answer)blue print
A machining system that uses information from CAD drawings to produce parts
and assemblies is a _______ system - (answer)CAM
An inexpensive computer output device that may be small enough to fit on a
desktop is a _______ printer - (answer)inkjet
, 3|Page
Print created from a microfilm negative - (answer)Blow-back
Reproduction technique that uses an electrostatic charge to duplicate an original -
(answer)Xerography
General term for a duplicate of an original drawing - (answer)Print
Reproduction on which dark lines are printed on a white background -
(answer)White print
Lines and figures that have specific meanings on a drawing - (answer)Symbols
To convert a common fraction to a decimal fraction, you would - (answer)divide
the numerator by the denominator
A metric rule is graduated in - (answer)millimeters
The decimal fraction equivalent of 3/4 inch is - (answer).75
One millimeter is equal to ______ of a meter - (answer)1/1000
When no number can be divided evenly into both the numerator and the
denominator of a fraction, the fraction is said to be - (answer)in lowest terms
