DELL CLIENT ADVANCED ACTUAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
When the side cover of Precision Tower 7920 is not assembled, the system will still power on. -
(ANSWER)False
On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED ? -
(ANSWER)not Power light
We Import a Foreign configuration in a RAID Array, if: -(ANSWER)The array containing foreign
configuration is in an Offline state
Select statements that are true about Trusted Platform Module (TPM) -(ANSWER)not The Trusted
Platform Module (TPM) is used to generate and store keys
After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before
re-assembling the side cover. However, system is not able to power on and displays LED error code of 4-
7. What could be the issue? -(ANSWER)The intrusion switch is triggered and power is cut-off. Install the
side cover to de-activate the intrusion switch.
Before replacing any hardware, what is the recommended solution for the BSOD or system freezing? -
(ANSWER)not Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what does it indicate? -(ANSWER)ePSA Pass
On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this
indicates the drive is rebuilding -(ANSWER)False
In general, an Anti-Static Mat is used to prevent Electrostatic damage -(ANSWER)True
Onsite Services for Ruggedized Notebooks are limited to CRU parts and Service Assembly Parts. -
(ANSWER)True
, DELL CLIENT ADVANCED ACTUAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
How many thermal performance control modes are there in Alienware Area 51m to support different
user scenarios? -(ANSWER)not 1.0
Overclocking is the process of making a computer or component in a computer operate faster than
specified by the manufacturer by modifying the system parameters -(ANSWER)True
In a PERC H730P controller, P stands for Performance -(ANSWER)True
iDRAC with Lifecycle Controller can be used for: -(ANSWER)not OS Deployment
A CAN (Controller Area Network) bus is a vehicle bus standard designed to allow micro controllers and
devices to communicate with each other in applications without a host computer. -(ANSWER)True
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins? -
(ANSWER)No POST
No Video
Where can the Field Service Manual containing Critical Callout, Disassembly and Reassembly instructions
be found? -(ANSWER)PRM / Educate Dell
iDRAC stands for: -(ANSWER)Integrated Dell Remote Access Controller
What steps must be taken if there is a fan-related error message displayed at the Start up, but the
system boots to the OS? -(ANSWER)not Check for Dust or debris on the Fans, clean them
The following items are unaffected by the RTC reset: -(ANSWER)not Service Tag
(VERIFIED ANSWERS) |ALREADY GRADED A+
When the side cover of Precision Tower 7920 is not assembled, the system will still power on. -
(ANSWER)False
On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED ? -
(ANSWER)not Power light
We Import a Foreign configuration in a RAID Array, if: -(ANSWER)The array containing foreign
configuration is in an Offline state
Select statements that are true about Trusted Platform Module (TPM) -(ANSWER)not The Trusted
Platform Module (TPM) is used to generate and store keys
After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before
re-assembling the side cover. However, system is not able to power on and displays LED error code of 4-
7. What could be the issue? -(ANSWER)The intrusion switch is triggered and power is cut-off. Install the
side cover to de-activate the intrusion switch.
Before replacing any hardware, what is the recommended solution for the BSOD or system freezing? -
(ANSWER)not Reseat the DIMMs
If an Edge Gateway is Blinking green after the diagnostics, what does it indicate? -(ANSWER)ePSA Pass
On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off; this
indicates the drive is rebuilding -(ANSWER)False
In general, an Anti-Static Mat is used to prevent Electrostatic damage -(ANSWER)True
Onsite Services for Ruggedized Notebooks are limited to CRU parts and Service Assembly Parts. -
(ANSWER)True
, DELL CLIENT ADVANCED ACTUAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+
How many thermal performance control modes are there in Alienware Area 51m to support different
user scenarios? -(ANSWER)not 1.0
Overclocking is the process of making a computer or component in a computer operate faster than
specified by the manufacturer by modifying the system parameters -(ANSWER)True
In a PERC H730P controller, P stands for Performance -(ANSWER)True
iDRAC with Lifecycle Controller can be used for: -(ANSWER)not OS Deployment
A CAN (Controller Area Network) bus is a vehicle bus standard designed to allow micro controllers and
devices to communicate with each other in applications without a host computer. -(ANSWER)True
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins? -
(ANSWER)No POST
No Video
Where can the Field Service Manual containing Critical Callout, Disassembly and Reassembly instructions
be found? -(ANSWER)PRM / Educate Dell
iDRAC stands for: -(ANSWER)Integrated Dell Remote Access Controller
What steps must be taken if there is a fan-related error message displayed at the Start up, but the
system boots to the OS? -(ANSWER)not Check for Dust or debris on the Fans, clean them
The following items are unaffected by the RTC reset: -(ANSWER)not Service Tag
