Fresenius Final Exam Latest Update 2025-2026
Exam 245 Questions with 100% Verified Correct
Answers Guaranteed A+
-250mmHg - CORRECT ANSWER: what is the limit for Arterial Pressure?
(COLT)
Clamp Venous line
Off pump
Left side
Trendelenburg - CORRECT ANSWER: Air embolism protocol
+/-0.5mS of Theoretical Conductivity - CORRECT ANSWER: Before the start of
treatment, check that the machine's conductivity alarm parameters are set at
1 (90+)
2 (60-89)
3 (30-59)
4 (15-29)
5 (also called chronic kidney disease) < 15 - CORRECT ANSWER: five stages of kidney
disease
1 part bleach: 10 part water solution - CORRECT ANSWER: The first bleach solution
used to clean a large blood spill area (greater than 10mL/s) is
1:10 followed by 1:100 - CORRECT ANSWER: What concentration of bleach is used to
clean up a blood spill greater than 10ml?
,1:10 then 1:100 - CORRECT ANSWER: used to clean up blood greater than 10ml
1.4 - CORRECT ANSWER: Medical care goal of ktv is
1.5 mL - CORRECT ANSWER: 1000 mg in 2mL of Vanco (order is for 750 mg)
100 mL - CORRECT ANSWER: how much water to collect for chlorine testing
15 min - CORRECT ANSWER: How long must RO water run before doing water tests?
15 min - CORRECT ANSWER: How much time to return blood
150 - CORRECT ANSWER: At what rate do you prime the dialyzer?
150-200ml/min - CORRECT ANSWER: the blood pump should be set at ________
during reinfusion
1st check hanson connectors
2nd blood leak strip - CORRECT ANSWER: Blood leak alarm
2.0 kg - CORRECT ANSWER: Calculate the target weight for a pt with EDW 75.5kg,
Pre-treatment weight 77.0g, Prime and rinse 500ml
20-30 seconds - CORRECT ANSWER: How long must you rub your hands with hand
sanitizer?
200-300 - CORRECT ANSWER: acceptable KECN value range
, 3-5 min - CORRECT ANSWER: How long to administer Hep?
300 ml - CORRECT ANSWER: How many ml of NS must be in the saline bag at the
start of tx?
300 mL - CORRECT ANSWER: minimum amount of saline that must be in the bag
during tx
300-350 mL/min - CORRECT ANSWER: What rate for a 16 gauge needle?
40 degrees Celsius - CORRECT ANSWER: Machine temp
40-60 seconds - CORRECT ANSWER: How long to hand wash with soap and water?
50 mg q other week - CORRECT ANSWER: 100 mg of iron per month
6.9-7.6 - CORRECT ANSWER: PH range
6.9-7.6 - CORRECT ANSWER: The final dialysate must have a ph between
60 sec - CORRECT ANSWER: how long do you move chlorine strips back and forth?
65-75% - CORRECT ANSWER: Venous chamber must be how full at start of tx?
7.0 - CORRECT ANSWER: PH measurement safe for dialysate
85-95% - CORRECT ANSWER: Arterial chamber must be how full at start of tx?
Exam 245 Questions with 100% Verified Correct
Answers Guaranteed A+
-250mmHg - CORRECT ANSWER: what is the limit for Arterial Pressure?
(COLT)
Clamp Venous line
Off pump
Left side
Trendelenburg - CORRECT ANSWER: Air embolism protocol
+/-0.5mS of Theoretical Conductivity - CORRECT ANSWER: Before the start of
treatment, check that the machine's conductivity alarm parameters are set at
1 (90+)
2 (60-89)
3 (30-59)
4 (15-29)
5 (also called chronic kidney disease) < 15 - CORRECT ANSWER: five stages of kidney
disease
1 part bleach: 10 part water solution - CORRECT ANSWER: The first bleach solution
used to clean a large blood spill area (greater than 10mL/s) is
1:10 followed by 1:100 - CORRECT ANSWER: What concentration of bleach is used to
clean up a blood spill greater than 10ml?
,1:10 then 1:100 - CORRECT ANSWER: used to clean up blood greater than 10ml
1.4 - CORRECT ANSWER: Medical care goal of ktv is
1.5 mL - CORRECT ANSWER: 1000 mg in 2mL of Vanco (order is for 750 mg)
100 mL - CORRECT ANSWER: how much water to collect for chlorine testing
15 min - CORRECT ANSWER: How long must RO water run before doing water tests?
15 min - CORRECT ANSWER: How much time to return blood
150 - CORRECT ANSWER: At what rate do you prime the dialyzer?
150-200ml/min - CORRECT ANSWER: the blood pump should be set at ________
during reinfusion
1st check hanson connectors
2nd blood leak strip - CORRECT ANSWER: Blood leak alarm
2.0 kg - CORRECT ANSWER: Calculate the target weight for a pt with EDW 75.5kg,
Pre-treatment weight 77.0g, Prime and rinse 500ml
20-30 seconds - CORRECT ANSWER: How long must you rub your hands with hand
sanitizer?
200-300 - CORRECT ANSWER: acceptable KECN value range
, 3-5 min - CORRECT ANSWER: How long to administer Hep?
300 ml - CORRECT ANSWER: How many ml of NS must be in the saline bag at the
start of tx?
300 mL - CORRECT ANSWER: minimum amount of saline that must be in the bag
during tx
300-350 mL/min - CORRECT ANSWER: What rate for a 16 gauge needle?
40 degrees Celsius - CORRECT ANSWER: Machine temp
40-60 seconds - CORRECT ANSWER: How long to hand wash with soap and water?
50 mg q other week - CORRECT ANSWER: 100 mg of iron per month
6.9-7.6 - CORRECT ANSWER: PH range
6.9-7.6 - CORRECT ANSWER: The final dialysate must have a ph between
60 sec - CORRECT ANSWER: how long do you move chlorine strips back and forth?
65-75% - CORRECT ANSWER: Venous chamber must be how full at start of tx?
7.0 - CORRECT ANSWER: PH measurement safe for dialysate
85-95% - CORRECT ANSWER: Arterial chamber must be how full at start of tx?
