Range Safety OIC-RSO LATEST UPDATE 2024-
2025 225 100 QUESTIONS AND VERIFIED
CORRECT ANSWERS GUARANTEED A+
Access Restricted - CORRECT ANSWER: fences, barricades, signs, guards or a
combination of these types of positive controls are used to protect unauthorized
personnel
After Use of temporary impact area - CORRECT ANSWER: After an exercise, the
temporary impact area should be capable of being cleared and returned to the original
state.
Airspace - CORRECT ANSWER: refers to any one of several types of controlled and
uncontrolled airspace required to support range operations. Airspace over a range may
include restricted areas, warning areas, military operations, and air traffic controlled
assigned airspace.
Ammo not fired - CORRECT ANSWER: All ammo that is not fired during an exercise
must be returned to the ammunition supply point in original packaging after the exercise
Ammunition not expended - CORRECT ANSWER: is turned over to the ammunition
technician for return to the Ammunition Supply Point (ASP).
Angle P - CORRECT ANSWER: defines the area beginning at the firing point, located to
the left and right of the dispersion area, which contains projectiles after making initial
contact with the target medium.
Angle Q - CORRECT ANSWER: defines the area beginning at distance Y, located to the
left and right of the dispersion area, which contains projectiles after making initial
contact with the target medium.
, AR385-63/MCO 3570.1 - CORRECT ANSWER: establishes ranges safety policies and
responsibilities for firing ammunition, lasers, guided, missiles, and rockets on Marine
Corps and Army ranges.
Area A - CORRECT ANSWER: is the secondary danger area, or buffer zone, that
laterally parallels the impact area or ricochet area depending on the weapon system.
Area A contains fragments, debris, and components from frangible or explosive
projectiles and warheads functioning on the right or left edge of the impact area or
ricochet area. For non-explosive projectiles Area A is a standard 100m in width. For
explosive projectiles, the width varies by weapon and munition.
Assess Hazards - CORRECT ANSWER: For each hazard identified, you must
determine the associated degree of risk in terms of severity and probability. Once
probability and severity are established, hazards must also be categorized. The risk
assessment categories are described in in MCO 3500.27.
Use the Risk Assessment Matrix to determine the Risk Assessment Code (RAC). The
RAC represents the overall risk of a hazard. You will determine the RAC for each
hazard by using each hazard's severity and probability category.
At turn-in you will provide - CORRECT ANSWER: Quantify expended
Quantity turned in (serviceable)
Quantify turned in (unserviceable)
batwing SDZ - CORRECT ANSWER: provides greater containment of ricochets
Chapter 7 MCO P4400.150 - CORRECT ANSWER: Consumer-Level Supply Policy
Manual establishes policies to account for ammunition received, expended, and
returned
Cone SDZ - CORRECT ANSWER: is typically used when conducting training that does
not involve fire and movement or fire and maneuver.
2025 225 100 QUESTIONS AND VERIFIED
CORRECT ANSWERS GUARANTEED A+
Access Restricted - CORRECT ANSWER: fences, barricades, signs, guards or a
combination of these types of positive controls are used to protect unauthorized
personnel
After Use of temporary impact area - CORRECT ANSWER: After an exercise, the
temporary impact area should be capable of being cleared and returned to the original
state.
Airspace - CORRECT ANSWER: refers to any one of several types of controlled and
uncontrolled airspace required to support range operations. Airspace over a range may
include restricted areas, warning areas, military operations, and air traffic controlled
assigned airspace.
Ammo not fired - CORRECT ANSWER: All ammo that is not fired during an exercise
must be returned to the ammunition supply point in original packaging after the exercise
Ammunition not expended - CORRECT ANSWER: is turned over to the ammunition
technician for return to the Ammunition Supply Point (ASP).
Angle P - CORRECT ANSWER: defines the area beginning at the firing point, located to
the left and right of the dispersion area, which contains projectiles after making initial
contact with the target medium.
Angle Q - CORRECT ANSWER: defines the area beginning at distance Y, located to the
left and right of the dispersion area, which contains projectiles after making initial
contact with the target medium.
, AR385-63/MCO 3570.1 - CORRECT ANSWER: establishes ranges safety policies and
responsibilities for firing ammunition, lasers, guided, missiles, and rockets on Marine
Corps and Army ranges.
Area A - CORRECT ANSWER: is the secondary danger area, or buffer zone, that
laterally parallels the impact area or ricochet area depending on the weapon system.
Area A contains fragments, debris, and components from frangible or explosive
projectiles and warheads functioning on the right or left edge of the impact area or
ricochet area. For non-explosive projectiles Area A is a standard 100m in width. For
explosive projectiles, the width varies by weapon and munition.
Assess Hazards - CORRECT ANSWER: For each hazard identified, you must
determine the associated degree of risk in terms of severity and probability. Once
probability and severity are established, hazards must also be categorized. The risk
assessment categories are described in in MCO 3500.27.
Use the Risk Assessment Matrix to determine the Risk Assessment Code (RAC). The
RAC represents the overall risk of a hazard. You will determine the RAC for each
hazard by using each hazard's severity and probability category.
At turn-in you will provide - CORRECT ANSWER: Quantify expended
Quantity turned in (serviceable)
Quantify turned in (unserviceable)
batwing SDZ - CORRECT ANSWER: provides greater containment of ricochets
Chapter 7 MCO P4400.150 - CORRECT ANSWER: Consumer-Level Supply Policy
Manual establishes policies to account for ammunition received, expended, and
returned
Cone SDZ - CORRECT ANSWER: is typically used when conducting training that does
not involve fire and movement or fire and maneuver.
