1|Page
SUMMARY METAL COILS ENDORSEMENT (NYS)
EXAM 2025| BRAND NEW ACTUAL EXAM WITH 100%
VERIFIED QUESTIONS AND CORRECT SOLUTIONS|
GUARANTEED VALUE PACK| ACE YOUR GRADES.
What types of commercial vehicles are required to comply with the cargo
securement regulations?,trucks, truck tractors, semi-trailers, full trailers and
tractor-pole trailers with a gross vehicle weight rating of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing
lanes?,The minimum side-to-side or lateral force = 50% of the cargo weight when
traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")?,0.5 g.
What is the definition of Working Load Limit (WLL)?,The maximum load that may
be applied to a component of a cargo securement system during normal service;
it is usually assigned by the manufacturer of the component.
As required by state and federal regulations, who is responsible for proper load
securement?,The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how many
miles after beginning a trip?,50 Miles
SUMMARY METAL COILS ENDORSEMENT (NYS)
EXAM 2025| BRAND NEW ACTUAL EXAM WITH 100%
VERIFIED QUESTIONS AND CORRECT SOLUTIONS|
GUARANTEED VALUE PACK| ACE YOUR GRADES.
What types of commercial vehicles are required to comply with the cargo
securement regulations?,trucks, truck tractors, semi-trailers, full trailers and
tractor-pole trailers with a gross vehicle weight rating of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing
lanes?,The minimum side-to-side or lateral force = 50% of the cargo weight when
traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")?,0.5 g.
What is the definition of Working Load Limit (WLL)?,The maximum load that may
be applied to a component of a cargo securement system during normal service;
it is usually assigned by the manufacturer of the component.
As required by state and federal regulations, who is responsible for proper load
securement?,The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how many
miles after beginning a trip?,50 Miles
