1|Page
NATE GAS HEATING (ACTUAL 2025/2026) EXAM
QUESTIONS AND VERIFIED 100% ANSWERS
Since 1992, the United States Department of Energy has required that all furnaces
sold and installed from that date on must have an AFUE of no less than:
A: 70%
B: 75%
C: 78%
D: 80% - (answer)C: 78%
Many pre-1992 furnaces have efficiencies around _______.
A: 10%
B: 40%
C: 60%
D: 80% - (answer)C: 60%
,2|Page
Today, furnaces with AFUE ratings greater than _____ are available.
A: 85%
B: 90%
C: 100%
D: 110% - (answer)B: 90%
A thermocouple is used with:
A: Intermittent pilot systems
B: Direct spark ignition systems
C: Glow coil ignition systems
D: Standing pilot ignition systems - (answer)D: Standing pilot ignition systems
The purpose of the gas pressure regulator is to:
, 3|Page
A: Keep the color of the flame constant
B: Keep the high limit switch from tripping
C: Maintain a constant gas pressure at the burner
D: Allow the gas valve to operate smoothly and accurately - (answer)C: Maintain
a constant gas pressure at the burner
The instrument used to measure outlet gas pressure is the:
A: Velometer
B: Anemometer
C: Monometer
D: Draft gauge - (answer)C: Monometer
The regulator on a natural gas furnace should be adjusted to supply _____ inches
of pressure at the burners.
NATE GAS HEATING (ACTUAL 2025/2026) EXAM
QUESTIONS AND VERIFIED 100% ANSWERS
Since 1992, the United States Department of Energy has required that all furnaces
sold and installed from that date on must have an AFUE of no less than:
A: 70%
B: 75%
C: 78%
D: 80% - (answer)C: 78%
Many pre-1992 furnaces have efficiencies around _______.
A: 10%
B: 40%
C: 60%
D: 80% - (answer)C: 60%
,2|Page
Today, furnaces with AFUE ratings greater than _____ are available.
A: 85%
B: 90%
C: 100%
D: 110% - (answer)B: 90%
A thermocouple is used with:
A: Intermittent pilot systems
B: Direct spark ignition systems
C: Glow coil ignition systems
D: Standing pilot ignition systems - (answer)D: Standing pilot ignition systems
The purpose of the gas pressure regulator is to:
, 3|Page
A: Keep the color of the flame constant
B: Keep the high limit switch from tripping
C: Maintain a constant gas pressure at the burner
D: Allow the gas valve to operate smoothly and accurately - (answer)C: Maintain
a constant gas pressure at the burner
The instrument used to measure outlet gas pressure is the:
A: Velometer
B: Anemometer
C: Monometer
D: Draft gauge - (answer)C: Monometer
The regulator on a natural gas furnace should be adjusted to supply _____ inches
of pressure at the burners.