3/30/25, 9:57 OSHA 30 Flashcards |
AM
OSHA 30 EXAM QUESTIONS AND ANSWERS WITH COMPLETE
SOLUTIONS VERIFIED GRADED A++
Terms in this set (297)
Hazard or mitigation controls may be True
short and/or long term
Hazard prevention and control should Human and administrative resources
contain both
A safety and health program is called a A safety and health program changes as an organization changes
living document why
What should an incident All the above
investigation program include
I'm general accidents and incidents are Unsafe or unhealthy actions and behaviors
caused by unsafe or hazardous
conditions and
Who should be on the team that All the above
evaluates a safety and health program
Who should be involved in All the above
communication and coordination of
safety and health programs
Managers are considered what within an Agents of change
organization when it comes to safety
and health
What is the ideal time for As promptly as possible since memories fade over time
conducting witness interviews during
an incident investigation
Which of the following is an incident that All the above
should be investigated
Of the following who should be the Safety and health subject matter expert
best choice to write your organization
safety and health program
You have been investigating an Table saws must always have guards installed
incident where a worker was struck in
the head by a flying scrap of wood
from a table saw which of the
following corrective actions might be
the most appropriate
Which of the following is a benefit for A company may need to bid on a contract that requires safety and health
having a safety and health program documentation
When should a formal hazard When a new hazard is uncovered
assessment or inspection be
performed
Which of the following is a line role with Implementing and maintaining the safety and health program
regard to an organizations safety and
health program
Which of the following statement are Nearly all workplace incidents are wholly preventable
true about incidents
Personal fall arrest hooks must be locking Designed to prevent opening and slipping off the connector
and
1/
6
, 3/30/25, 9:57 OSHA 30 Flashcards |
AM
Personal fall arrest system connectors 5000 pounds
must be compatible and capable of
supporting at least
If there are defects found during the Removed immediately from service
inspection of personal fall protection
equipment or if the equipment has been
used in an arrest it must be
Three major components of personal fall Connecting device
arrest sustain anchor and the anchorage
connector full body harness and
Horizontal lifelines shall be designed Qualified person
installed and used under the supervision
of a what as part of a complete personal
fall arrest system which maintains safety
factor of at least two
Fall restraint systems must meet which of All the above
the following criteria
It is important to secure your ladder Fixed and secure points
whenever feasible to
OSHA and ladder manufacturers require 3 points of contact
which of the following when ascending or
descending
The three main types of portable ladders Step straight and extension
are
The 4:1 angle rule for extension ladders For every 4ft of the ladder it should be 1 for away from the wall
means which of the following
Protect yourself while working in a ladder All the above
by
When using scaffolds make sure there is All the above
Supported scaffold systems must be Both b and c
inspected for
Every supported scaffold and it's 4 times
components must support without failure
it's own weight and at least what the
intended load
The guardrails on suspended scaffolds 38 and 45 inches high
manufactured after the year 2000 must be
how long with mid rails installed
approximately halfway between the top
rail and the platform surface
A what must be available to direct Competent person
workers who are constructing a moving
scaffolds
Employees must not work on scaffold The surface are determined to have the strength and structural integrity to
surfaces until support their intended loads
Hazards of type scaffold being used along with it's maximum intended load and
Scaffold training must include
capacity
2/
6
AM
OSHA 30 EXAM QUESTIONS AND ANSWERS WITH COMPLETE
SOLUTIONS VERIFIED GRADED A++
Terms in this set (297)
Hazard or mitigation controls may be True
short and/or long term
Hazard prevention and control should Human and administrative resources
contain both
A safety and health program is called a A safety and health program changes as an organization changes
living document why
What should an incident All the above
investigation program include
I'm general accidents and incidents are Unsafe or unhealthy actions and behaviors
caused by unsafe or hazardous
conditions and
Who should be on the team that All the above
evaluates a safety and health program
Who should be involved in All the above
communication and coordination of
safety and health programs
Managers are considered what within an Agents of change
organization when it comes to safety
and health
What is the ideal time for As promptly as possible since memories fade over time
conducting witness interviews during
an incident investigation
Which of the following is an incident that All the above
should be investigated
Of the following who should be the Safety and health subject matter expert
best choice to write your organization
safety and health program
You have been investigating an Table saws must always have guards installed
incident where a worker was struck in
the head by a flying scrap of wood
from a table saw which of the
following corrective actions might be
the most appropriate
Which of the following is a benefit for A company may need to bid on a contract that requires safety and health
having a safety and health program documentation
When should a formal hazard When a new hazard is uncovered
assessment or inspection be
performed
Which of the following is a line role with Implementing and maintaining the safety and health program
regard to an organizations safety and
health program
Which of the following statement are Nearly all workplace incidents are wholly preventable
true about incidents
Personal fall arrest hooks must be locking Designed to prevent opening and slipping off the connector
and
1/
6
, 3/30/25, 9:57 OSHA 30 Flashcards |
AM
Personal fall arrest system connectors 5000 pounds
must be compatible and capable of
supporting at least
If there are defects found during the Removed immediately from service
inspection of personal fall protection
equipment or if the equipment has been
used in an arrest it must be
Three major components of personal fall Connecting device
arrest sustain anchor and the anchorage
connector full body harness and
Horizontal lifelines shall be designed Qualified person
installed and used under the supervision
of a what as part of a complete personal
fall arrest system which maintains safety
factor of at least two
Fall restraint systems must meet which of All the above
the following criteria
It is important to secure your ladder Fixed and secure points
whenever feasible to
OSHA and ladder manufacturers require 3 points of contact
which of the following when ascending or
descending
The three main types of portable ladders Step straight and extension
are
The 4:1 angle rule for extension ladders For every 4ft of the ladder it should be 1 for away from the wall
means which of the following
Protect yourself while working in a ladder All the above
by
When using scaffolds make sure there is All the above
Supported scaffold systems must be Both b and c
inspected for
Every supported scaffold and it's 4 times
components must support without failure
it's own weight and at least what the
intended load
The guardrails on suspended scaffolds 38 and 45 inches high
manufactured after the year 2000 must be
how long with mid rails installed
approximately halfway between the top
rail and the platform surface
A what must be available to direct Competent person
workers who are constructing a moving
scaffolds
Employees must not work on scaffold The surface are determined to have the strength and structural integrity to
surfaces until support their intended loads
Hazards of type scaffold being used along with it's maximum intended load and
Scaffold training must include
capacity
2/
6
