OSHA 30 EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS VERIFIED

OSHA 30 EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS VERIFIED Practice questions for this set personal fall-arrest system must be secured properly to a Anchorage point when a crane is moving a load, it operates within a ___: if a worker is within that area, he or she could be caught-in-between the crane or its load and either the ground, or another piece of equipment Swing radius a ___ protects you from shock by detecting differences in current as small as 5 milliamps between the amount of electricity flowing into a circuit and the amount flowing out GFCI ___ are common cause of struck-by accident at worksites and can sometimes be prevented by using back-up alarms Heavy vehicles fall protection measures are required when workers are exposed to a possible fall of ___ or more to a lower level Six feet locking-out, tagging-out refers to the practice of: All of above which of the following is true of an arc flash? All of above which of the following can be used to protect a trench 5-feet or more in depth? All of above which of the following is an example of a passive fall protection system? All of above a lanyard fall-arrest system slows and eventually stops descent and absorbs the forces that could otherwise injure the worker Shock absorbing ___ must be capable of supporting at least 2.5 times the load being lifted Jacking equipment Cranes, ladders, scaffold, backhoes, and paint rollers all present which type of electrical hazard at a worksite Contact w overhead power lines electrical power tools must be __ by a 3- wire cord, __ insulated, powered by a low- voltage transformer, or powered by a self-contained ___ grounded... double... battery MOT zone in traffic control plan provides the first indication to motorists that there is upcoming construction work is called the ___ Advanced warning area Which of the following is an example of a physical Hazard for which employers must provide PPE Sharp Objects