3/30/25, 10:04 OSHA 30 Miscellaneous |
AM
OSHA 30 MISCELLANEOUS EXAM QUESTIONS AND ANSWERS VERIFIED
Practice questions for this set
Learn 1/7 Study using Learn
an explanation of the project safety requirements and 'zero tolerance' details should take
place when
Select the correct definition
1once a year during the annual review 2during initial and periodic training
at the end of the project when everything is
3complete 4only after an incident has occurred
Don't know?
Terms in this set (143)
Last step in the systems approach is corrective action
electrical
a properly installed/used standard GFCI
shock AND
receptacle can prevent
electrocution
which of the following in NOT a part of body belt
the personal fall arrest system:
The standard allows the permissible 50 ug/m^3
exposure limit (PEL) for respirable
crystalline silica to how many
micrograms per cubic meter of air,
averaged over an
8-hour shift?
when setting up a step ladder, at least false
three legs must be level
which of the following is a good work all of the above
practice when working in or around a
trench or excavation?
to prevent injury while maintaining locked-out/tagged out (de-engergized)
equipment, make sure the equipment is
____before starting
the definition of a struck-by hazard is A. An incident where the impact alone creates an injury
1/
7
, 3/30/25, 10:04 OSHA 30 Miscellaneous |
AM
high visibility clothing will generally use fluorescent gray with black bordering
one or more of the following colors
EXCEPT:
what does OSHA require when working appropriate lifesaving equipment
over or near water and there is a potential
for drowning?
Some states may have more stringent TRUE
requirements than Federal OSHA for
working over or near water.
OSHA's respirable crystalline silica 600
standard is predicted to save how many
lives per year?
According to TABLE 1 of the respirable stationary masonry saw
crystalline silica standard, for which of
the following activities should a wet
method of dust control be used?
some activities, especially for large Handheld saw
machines, have additional control
requirements beyond wet and dust
collection methods, such as the driver
being in an enclosed cab. Which of the
following activities does NOT have
additional control requirements beyond
wet and dust collection methods?
crane operators must be in ____ constant
communication with the rigger
The Anti-Two Block D.All of the above
the competent person must know all of the above
OSHA defines a competent person, true
in part, as someone who "has the
authority to take prompt corrective
measures to eliminate" hazards
Which are properties of cohesive soil all of the above
A hand-sized sample of cemented soil true
can't be crushed into a powder.
Saturation does not mean that water in true
the soil, or soil itself, will flow.
"Free-seeping" soil is considered true
submerged soil
Fissures are small cracks or stress in an true
exposed surface.
A "slippery sheet" is a layered system
potential characteristic of
soils can be downgraded from A to B true
even when it meets confined
compressive
strength requirements
2/
7
AM
OSHA 30 MISCELLANEOUS EXAM QUESTIONS AND ANSWERS VERIFIED
Practice questions for this set
Learn 1/7 Study using Learn
an explanation of the project safety requirements and 'zero tolerance' details should take
place when
Select the correct definition
1once a year during the annual review 2during initial and periodic training
at the end of the project when everything is
3complete 4only after an incident has occurred
Don't know?
Terms in this set (143)
Last step in the systems approach is corrective action
electrical
a properly installed/used standard GFCI
shock AND
receptacle can prevent
electrocution
which of the following in NOT a part of body belt
the personal fall arrest system:
The standard allows the permissible 50 ug/m^3
exposure limit (PEL) for respirable
crystalline silica to how many
micrograms per cubic meter of air,
averaged over an
8-hour shift?
when setting up a step ladder, at least false
three legs must be level
which of the following is a good work all of the above
practice when working in or around a
trench or excavation?
to prevent injury while maintaining locked-out/tagged out (de-engergized)
equipment, make sure the equipment is
____before starting
the definition of a struck-by hazard is A. An incident where the impact alone creates an injury
1/
7
, 3/30/25, 10:04 OSHA 30 Miscellaneous |
AM
high visibility clothing will generally use fluorescent gray with black bordering
one or more of the following colors
EXCEPT:
what does OSHA require when working appropriate lifesaving equipment
over or near water and there is a potential
for drowning?
Some states may have more stringent TRUE
requirements than Federal OSHA for
working over or near water.
OSHA's respirable crystalline silica 600
standard is predicted to save how many
lives per year?
According to TABLE 1 of the respirable stationary masonry saw
crystalline silica standard, for which of
the following activities should a wet
method of dust control be used?
some activities, especially for large Handheld saw
machines, have additional control
requirements beyond wet and dust
collection methods, such as the driver
being in an enclosed cab. Which of the
following activities does NOT have
additional control requirements beyond
wet and dust collection methods?
crane operators must be in ____ constant
communication with the rigger
The Anti-Two Block D.All of the above
the competent person must know all of the above
OSHA defines a competent person, true
in part, as someone who "has the
authority to take prompt corrective
measures to eliminate" hazards
Which are properties of cohesive soil all of the above
A hand-sized sample of cemented soil true
can't be crushed into a powder.
Saturation does not mean that water in true
the soil, or soil itself, will flow.
"Free-seeping" soil is considered true
submerged soil
Fissures are small cracks or stress in an true
exposed surface.
A "slippery sheet" is a layered system
potential characteristic of
soils can be downgraded from A to B true
even when it meets confined
compressive
strength requirements
2/
7
