4/5/25, 2:21 CSX- Freight Conductor final |
PM
CSX- FREIGHT CONDUCTOR FINAL EXAM QUESTIONS AND
ANSWERS WITH COMPLETE SOLUTIONS VERIFIED GRADED A+
+
Terms in this set (168)
202.2- What's the indication when a flag, Proceed
hand or lantern signal has raised or
lowered vertically
6104- Your key train has arrived at Midway CT-168
Yard to make a pickup of 20 cars. You will
place those cars at the lead end of
the
train. After adding the cars to the train
and making the appropriate brake test,
what documents must be updated before
departing?
4509.1- T/F True
When handling 1 or more clearance
implicated shipments in your train is the
follow statement True or False?
Do not enter a yard terminal where a yard
master on duty, until you tell the yard
master of the shipment.
4505.1- When handling a train with one or Clearance bureau instructions
more clearance implicated shipments,
what instructions must be included as
part of your CXT train documents if the
shipment was not authorized verbally?
301.2- Your train is authorized on the Crew members direct the locomotive operator to slow the train to the authorized
Atlanta subdivision at 50mph. While speed
descending the grade, you exceed the
speed on a grade to 53mph. What action
is required? (Your speeding by 3 mph)
301.2- Your speeding by 7 mph. What do 1) Crew members direct the locomotive operators to stop the train
you do? immediately and report the occurrence to the proper authority
(2 Answer) 2)Must not proceed unit released
401.3- Rolling equipment must not 1) Switches and derails connected with the movement are properly lined
foul the track until it can visually be
determine that? 2)The attend route is clear
(2 Answer)
407.1- You been instructed by the yard 1) Standing outside the rail off the end of the cross top of the connected
master to leave cars in track 14. Where track extend arm toward equipment
clearance points are not identified or
visible. Identify steps required to 2)Position equipment an additional 50ft in the track beyond the location where
determine the clearance point. it can not longer be touched
(2 Answers)
1/
10
, 4/5/25, 2:21 CSX- Freight Conductor final |
PM
401.8- T/F 1) False
After operating a switch or derail the 2)False
employee must make certain that the
switch is properly lined and the switch 3)True
point fits properly. What else is true?
4)True
1) It is equipped with a reflective
marking on the handle?
2)It is at least 100ft from a road crossing?
3)The lever is latched?
4) Device is locked if it's equipped with
a lock
406.8- When shoving for purpose other 1) Improperly lined switch
then making a coupling. You must stop
150ft short of a? 2)Derail
(2 Answers)
308.1- Train Q79510 is operating in CP Operating at a train speed not to exceed 20 mph for one train length then be
territory with maximum speed of 60 mph. governed by authority for movement rules for that territory
The train experiences a train initiated
undesired emergency brake application.
After stopping, the conductor inspects
the train, repairs the hose that cause the
emergency. After all reports to dispatcher
are made the train is permitted to
proceed. How must the train operate?
406.3- You been switching cars in a 1) Visually protect leading end of movement at all times
rail yard and you doubled two
tracks 2)Be position on the ground clear of tracks, riding the leading end, or constantly
together. While shoving your cars into modern the shove, using technology
one track, you must?
(2 Answers)
406.3- Who is responsible for protecting Any qualified employee
a shoving or pushing movement?
406.2- After coupling your locomotive to Stretch the slack to ensure couplers are made
a cut of cars. What must you do
next?
406.3- When shoving or pushing a train, The leading end of the movement must be visually protected by a qualified
what is your responsibility? employee at all times
300.4- What speed must not be 10 mph
exceeded when a train is operating
through a hand operating crossover not
to and from the main track?
300.2- Unless otherwise specified speed Entire train
restrictions applied to the____train?
300.2- Which of the following The must not be exceeded
statements is true authorizing train
speed?
2/
10
PM
CSX- FREIGHT CONDUCTOR FINAL EXAM QUESTIONS AND
ANSWERS WITH COMPLETE SOLUTIONS VERIFIED GRADED A+
+
Terms in this set (168)
202.2- What's the indication when a flag, Proceed
hand or lantern signal has raised or
lowered vertically
6104- Your key train has arrived at Midway CT-168
Yard to make a pickup of 20 cars. You will
place those cars at the lead end of
the
train. After adding the cars to the train
and making the appropriate brake test,
what documents must be updated before
departing?
4509.1- T/F True
When handling 1 or more clearance
implicated shipments in your train is the
follow statement True or False?
Do not enter a yard terminal where a yard
master on duty, until you tell the yard
master of the shipment.
4505.1- When handling a train with one or Clearance bureau instructions
more clearance implicated shipments,
what instructions must be included as
part of your CXT train documents if the
shipment was not authorized verbally?
301.2- Your train is authorized on the Crew members direct the locomotive operator to slow the train to the authorized
Atlanta subdivision at 50mph. While speed
descending the grade, you exceed the
speed on a grade to 53mph. What action
is required? (Your speeding by 3 mph)
301.2- Your speeding by 7 mph. What do 1) Crew members direct the locomotive operators to stop the train
you do? immediately and report the occurrence to the proper authority
(2 Answer) 2)Must not proceed unit released
401.3- Rolling equipment must not 1) Switches and derails connected with the movement are properly lined
foul the track until it can visually be
determine that? 2)The attend route is clear
(2 Answer)
407.1- You been instructed by the yard 1) Standing outside the rail off the end of the cross top of the connected
master to leave cars in track 14. Where track extend arm toward equipment
clearance points are not identified or
visible. Identify steps required to 2)Position equipment an additional 50ft in the track beyond the location where
determine the clearance point. it can not longer be touched
(2 Answers)
1/
10
, 4/5/25, 2:21 CSX- Freight Conductor final |
PM
401.8- T/F 1) False
After operating a switch or derail the 2)False
employee must make certain that the
switch is properly lined and the switch 3)True
point fits properly. What else is true?
4)True
1) It is equipped with a reflective
marking on the handle?
2)It is at least 100ft from a road crossing?
3)The lever is latched?
4) Device is locked if it's equipped with
a lock
406.8- When shoving for purpose other 1) Improperly lined switch
then making a coupling. You must stop
150ft short of a? 2)Derail
(2 Answers)
308.1- Train Q79510 is operating in CP Operating at a train speed not to exceed 20 mph for one train length then be
territory with maximum speed of 60 mph. governed by authority for movement rules for that territory
The train experiences a train initiated
undesired emergency brake application.
After stopping, the conductor inspects
the train, repairs the hose that cause the
emergency. After all reports to dispatcher
are made the train is permitted to
proceed. How must the train operate?
406.3- You been switching cars in a 1) Visually protect leading end of movement at all times
rail yard and you doubled two
tracks 2)Be position on the ground clear of tracks, riding the leading end, or constantly
together. While shoving your cars into modern the shove, using technology
one track, you must?
(2 Answers)
406.3- Who is responsible for protecting Any qualified employee
a shoving or pushing movement?
406.2- After coupling your locomotive to Stretch the slack to ensure couplers are made
a cut of cars. What must you do
next?
406.3- When shoving or pushing a train, The leading end of the movement must be visually protected by a qualified
what is your responsibility? employee at all times
300.4- What speed must not be 10 mph
exceeded when a train is operating
through a hand operating crossover not
to and from the main track?
300.2- Unless otherwise specified speed Entire train
restrictions applied to the____train?
300.2- Which of the following The must not be exceeded
statements is true authorizing train
speed?
2/
10
