4/5/25, 2:22
PM
CSX FREIGHT CONDUCTOR FINAL EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED GRADED A++
Practice questions for this set
Learn 1/7 Study using Learn
1) False
2) False
3)True
4)True
Select the correct term
True or False: When handling one or more clearance implicated shipments in a train, do not enter a
1
yard or terminal where a yardmaster is on-duty until the yardmaster is informed of the shipment.
True or False: Employees that have been trained and qualified may mount and dismount moving
2
equipment at a walking pace not to exceed 4 MPH except in case of emergency.
Multiple Part True or False:
After operating a switch or derail the employee must make certain the
1) Device has a reflective handle
3
2) Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked before being left unattended
1/
9
, 4/5/25, 2:22
PM
You are on the A76929 and have 34 loaded grain covered hoppers and 45 empty covered hoppers,
4What is the max speed of your train?
Don't know?
Terms in this set (168)
What hand signal is raised and lowered Proceed
vertically?
What form is required to move a key train CT-168
to show the hazmat position in a
track?
True or False: When handling one or more True
clearance implicated shipments in a train,
do not enter a yard or terminal where
a
yardmaster is on-duty until the
yardmaster is informed of the
shipment.
What instructions are required to handle Clearance Bureau Instructions
and move a clearance implicated
shipment?
Your train is traveling at a speed of 42 Tell the locomotive operator to slow down
miles per hour with a speed limit of 40
mph. This means you are speeding by 2
mph. what do you do?
Your train is traveling at a speed of 47 Tell the locomotive operator to stop
MPH with a speed limit of 40. This means
you are speeding by 7 MPH. what do you
do?
Your equipment must not foul a track 1) The intended route is clear
until it can be visually determined 2)Switches and derails connected with the movement are properly lined
that: 2 Answers
The yardmaster tasked you with putting 1) Standing outside the rail and off the end of crosstie extend arm toward
cars from track 11 into track 4. Track the equipment
4 2)Identify the location equipment can no longer be touched and position
does not have a clearance marker clearly equipment an additional 50 ft into track from location identified
visible. How would you find the clearance
point? 2 Answers
Multiple Part True or False: 1) False
After operating a switch or derail the 2)False
employee must make certain the 3)True
1) Device has a reflective handle 4)True
2)Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked
before being left unattended
When shoving equipment you must stop 1) A Fixed Derail
150 ft before what? Select All That Apply 2)An improperly lined switch
You are operating on the q79510 at max Operate the Train not to exceed 20 MPH for 1 train length
speed in CP territory and you experience
an air brake emergency what is required
when permitted to proceed?
You have been switching and doubled Protected by qualified employee on the leading end of the track, on the ground
your train, how do you protect the ahead of the movement and clear of all tracks
movement when shoving?
2/
9
PM
CSX FREIGHT CONDUCTOR FINAL EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED GRADED A++
Practice questions for this set
Learn 1/7 Study using Learn
1) False
2) False
3)True
4)True
Select the correct term
True or False: When handling one or more clearance implicated shipments in a train, do not enter a
1
yard or terminal where a yardmaster is on-duty until the yardmaster is informed of the shipment.
True or False: Employees that have been trained and qualified may mount and dismount moving
2
equipment at a walking pace not to exceed 4 MPH except in case of emergency.
Multiple Part True or False:
After operating a switch or derail the employee must make certain the
1) Device has a reflective handle
3
2) Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked before being left unattended
1/
9
, 4/5/25, 2:22
PM
You are on the A76929 and have 34 loaded grain covered hoppers and 45 empty covered hoppers,
4What is the max speed of your train?
Don't know?
Terms in this set (168)
What hand signal is raised and lowered Proceed
vertically?
What form is required to move a key train CT-168
to show the hazmat position in a
track?
True or False: When handling one or more True
clearance implicated shipments in a train,
do not enter a yard or terminal where
a
yardmaster is on-duty until the
yardmaster is informed of the
shipment.
What instructions are required to handle Clearance Bureau Instructions
and move a clearance implicated
shipment?
Your train is traveling at a speed of 42 Tell the locomotive operator to slow down
miles per hour with a speed limit of 40
mph. This means you are speeding by 2
mph. what do you do?
Your train is traveling at a speed of 47 Tell the locomotive operator to stop
MPH with a speed limit of 40. This means
you are speeding by 7 MPH. what do you
do?
Your equipment must not foul a track 1) The intended route is clear
until it can be visually determined 2)Switches and derails connected with the movement are properly lined
that: 2 Answers
The yardmaster tasked you with putting 1) Standing outside the rail and off the end of crosstie extend arm toward
cars from track 11 into track 4. Track the equipment
4 2)Identify the location equipment can no longer be touched and position
does not have a clearance marker clearly equipment an additional 50 ft into track from location identified
visible. How would you find the clearance
point? 2 Answers
Multiple Part True or False: 1) False
After operating a switch or derail the 2)False
employee must make certain the 3)True
1) Device has a reflective handle 4)True
2)Device is lined opposite movement
3) Lever is latched
4) If equipped, device is locked
before being left unattended
When shoving equipment you must stop 1) A Fixed Derail
150 ft before what? Select All That Apply 2)An improperly lined switch
You are operating on the q79510 at max Operate the Train not to exceed 20 MPH for 1 train length
speed in CP territory and you experience
an air brake emergency what is required
when permitted to proceed?
You have been switching and doubled Protected by qualified employee on the leading end of the track, on the ground
your train, how do you protect the ahead of the movement and clear of all tracks
movement when shoving?
2/
9
