Rope Rescue Ops IFSI test Correctly Answered Latest Update 2025

Rope Rescue Ops IFSI test Correctly Answered Latest Update All riggin shall have how many checks prior to Loading? - Answer -3 All equip. that falls 3 ft onto a hard surface shall be checked for: - Answer -Burs, sharp edges, dirt, contaminates, lose parts and deformaties Rope deployed from the anchor point to the ground should be deployed: - Answer -So only the amount needed is with a dynamic anchor Helmets used for rope rescue should be: - Answer -Lighter in weight Rope gloves shall be - Answer -Sturdy formfitting gloves with a leather palm T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge attendant to go over the edge and no farther - Answer -False A class one harness is designed to stop rescuer when he: - Answer -Reaches the edge T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer in an up-right position if they become unconscious. - Answer -True Class three harnesses are: - Answer -Designed to keep the rescuer or victim in an up-right position T/F: A person that falls in a harness and is suspended and unable to stand on a solid surface should lift their legs into a sitting position and avoid moving. - Answer -True T/F: When working in a harness with free mobility a person should keep your legs moving as much as possible - Answer -True T/F: A person that falls and is trapped and unable to lift their legs should squeeze their legs legs every 5 seconds until help arrives - Answer -True The 1st medical consideration for a victim in a class three harness that falls and becomes unconscious is: - Answer -Airway patency When a person is rescued from harness suspension they should be: - Answer -Assessed, ABC's, immobilization and transported in a sitting position All harness construction and testing standards are covered in NFPA: - Answer -1983 T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have the ability to call a stop during rope rescue operations if they see an unsafe operation - Answer -TrueA helmet used for repor rescue should be an approved light weight helmet with a: - Answer -3 point strap position under the chin Care and maintenance of all rescue equipment should be per: - Answer -the helmet's manufacturer recommendations T/F: Care should be taken when rope is under tension not to allow a second rope under tension (a line) to run across the stationary rope under tension. This will cause a nylon on nylon situation that can burn through a rope quickly - Answer -True