Solar Study Review Exam Questions And
Answers |Latest 2025 | Guaranteed Pass
What Is The Mounting System That Will Generally Provide The Best Solar Harvest Performance,
Not Considering The Additional Cost? - Answer✔Dual Axis Tracking
What Is The Biggest Advantage Of A Self-Ballasted PV Module Mounting System? - Answer✔No
Roof Penetrations
According To OSHA, What Is Perfect Ratio For Tilt Of A Ladder? - Answer✔4:1
What Is The Most Common Form Of Module Mounting System, Especially For Homes? -
Answer✔Stand Off And Rack Mounted
What Device Measures Solar Radiation? - Answer✔Pyrheliometer
What Is The Most Widely Accepted Standard That Must Be Followed In Most Jurisdictions In
The Electrical Design And Installation Of Photovoltaic Systems? - Answer✔NEC
Article 690 Of The NEC Addresses What Requirements? - Answer✔Solar Photovoltaic
Maximum PV, DC Circuit Voltage, Per The NEC, Cannot Be Greater Than ________ For One And
Two-Family Homes? - Answer✔600 Volts
1
, ©FYNDLAY 2025 ALL RIGHTS RESERVED 8:29 AM A+
What Correction Factor(s) MUST Be Used When Calculating The Maximum PV Circuit Voltage,
Per The NEC? - Answer✔Low Temperature Correction Factor
What NEC Required Correction Factor Must Be Applied When Determining The Maximum PV
Circuit Currents? - Answer✔125% (1.25)
Electrical Conductor (Wire) Sizes In Most Installation Are Given In What System? -
Answer✔American Wire Gauge (AWG)
What Would Be The Most Important Design Consideration In The Installation Of PV Modules? -
Answer✔Passive Cooling
What Type(s) Of Structural Load(s) Does Roof Structure And Mounting System Need To
Accommodate? - Answer✔1. Dead Loads
2. Live Loads
3. Wind Loads
4. Vibration Loads
5. Snow Loads
For Battery Systems, The Maximum Inverter Input Current Can Exceed Nominal Ratings Under
What Condition? - Answer✔The Battery Voltage Has Fallen To The Minimum Inverter Operating
Voltage And The Inverter Is At Peak Power Output.
What Is The Definition Of Ampacity, In Regards To Conductors? - Answer✔The Current That The
Conductor Can Carry Continuously Under Conditions Of Use Without Exceeding Its Temperature
Rating.
What Is The Term For Adjusting Conductor Ampacity For Conditions Of Use, Such As Ambient
Temperature? - Answer✔Derating
As The Ambient Temperature Increases, How Is Conductor Ampacity Affected? - Answer✔The
Ampacity Decreases
2