PM
NEIEP 825 EXAM QUESTIONS AND ANSWERS WITH COMPLETE
SOLUTIONS VERIFIED
Practice questions for this set
Learn 1/7 Study using Learn
True or false Rigging and hoisting equipment needs to be inspected at most on a daily
basis
Select the correct term
1True 2False
Don't know?
Terms in this set (54)
42 inches The Proper height for wellway barricades is_____high
Wellway barricades must be capable of withstanding a horizontal force of at least
200
_____lbs
The lanyard attached to a full body harness should protect the wearer from a fall
6
no greater than (2/4/6/8) feet
True or false A gfci will protect you from shock if you come across a hot lead and
False
a neutral lead
True True or false lock out tag out before climbing into the step or treadway band
The reference point usually indicated on column 4' about floor height is referred
Column mark
to as a _______ _______
the reference used to locate the center point of the wellway is called the ______
Column line
________
Eye , Skin The two hazards associated with laser usage are _______ and________damage
If you have a truss that has the value 5330 kg stamped on the side how much
11,726 lbs
does this weigh in standard measure?
The prints for a moving walk are printed with metric values and it shows the
117.05 ft
length to be 35678 mm what is the length in feet
True or false Rigging and hoisting equipment needs to be inspected at most on a
False
daily basis
You are planning on lifting a load off of a fixed 7"x3 1/4" beam with a weight of
8.000 lbs /8Kips
20lbs per foot that spans 9' what is the maximum weight the beam can carry
You are planning on lifting a load of a non-fixed 10" x 4 3/4" beam with a weight of
8,000lbs /8 kips
25.4lbs per foot that spans 10' what is the maximum weight the beam can carry
1/
3