4/11/25, 9:01 NEIEP 500 Final Flashcards |
PM
NEIEP 500 FINAL EXAM QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS VERIFIED
Practice questions for this set
Learn 1/7 Study using Learn
What is the minimum overhead clearance for raceways mounted in the machine room
overhead?
Select the correct term
15 feet (510 pg. 21) 28 feet (510 pg. 21)
37 feet (510 pg. 21)
410 feet (510 pg. 21)
Don't know?
Terms in this set (34)
What does the symbol shown below represent?
Ground (515 pg. 26)
How many turns of safety rope must remain on the safety drum after a rated load
3 (555 pg. 26)
and rated speed test of a winding drum operated safety?
Proper adjustment of which of the following can reduce the effects of building
rail jack bolts (555 pg. 16)
compression on an elevator installation?
Liquidtight Flexible Metal Conduit (505 What type of flex would be used to pipe a switch in a wet location?
pg. 6)
Which of the following components is used to engage and couple the car door to
door clutch (530 pg. 30)
the hoistway door during opening and closing?
100 feet (510 pg. 10) On high rise of raceways, the wires must be supported at least how many feet?
What is the minimum size wire allowed be code for wiring 100 VAC lighting
#14 (505 pg. 36)
circuits to elevator cars?
raceway (505 pg. 1) What is the metal enclosure that furnishes protection for electrical wire called?
42 inches What is the minimum height of a barricade placed around as open hoistway?
When bending conduit, what is the maximum number of bends in degrees
360 degrees
between access points?
Which of the following would be used to automatically reopen the doors without
proximity devices (535 pg. 23)
physical contact of power operated vertically sliding freight elevator doors?
It must be tamper proof to prevent Which of the following is a requirement that must be met when interlocks are
override of the door contacts (535 pg. 9) installed on freight elevators?
1/
2
PM
NEIEP 500 FINAL EXAM QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS VERIFIED
Practice questions for this set
Learn 1/7 Study using Learn
What is the minimum overhead clearance for raceways mounted in the machine room
overhead?
Select the correct term
15 feet (510 pg. 21) 28 feet (510 pg. 21)
37 feet (510 pg. 21)
410 feet (510 pg. 21)
Don't know?
Terms in this set (34)
What does the symbol shown below represent?
Ground (515 pg. 26)
How many turns of safety rope must remain on the safety drum after a rated load
3 (555 pg. 26)
and rated speed test of a winding drum operated safety?
Proper adjustment of which of the following can reduce the effects of building
rail jack bolts (555 pg. 16)
compression on an elevator installation?
Liquidtight Flexible Metal Conduit (505 What type of flex would be used to pipe a switch in a wet location?
pg. 6)
Which of the following components is used to engage and couple the car door to
door clutch (530 pg. 30)
the hoistway door during opening and closing?
100 feet (510 pg. 10) On high rise of raceways, the wires must be supported at least how many feet?
What is the minimum size wire allowed be code for wiring 100 VAC lighting
#14 (505 pg. 36)
circuits to elevator cars?
raceway (505 pg. 1) What is the metal enclosure that furnishes protection for electrical wire called?
42 inches What is the minimum height of a barricade placed around as open hoistway?
When bending conduit, what is the maximum number of bends in degrees
360 degrees
between access points?
Which of the following would be used to automatically reopen the doors without
proximity devices (535 pg. 23)
physical contact of power operated vertically sliding freight elevator doors?
It must be tamper proof to prevent Which of the following is a requirement that must be met when interlocks are
override of the door contacts (535 pg. 9) installed on freight elevators?
1/
2
