4/11/25, 9:10
PM
NEIEP 535 EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED
LATEST UPDATE
16 studiers in 3 days Leave the first rating
Save
When installing door panels, which of the When properly balanced, the doors will tend to open slightly
following statements is correct? 3 multiple choice options
A freight door that has two different panel Compound doors 3 multiple choice options
sizes to accommodate a shallow pit is
identified as follows
When setting up your work area for The midrail must be set to a height of 21 inches 3 multiple choice options
freight door installation, which of the
following statements is correct regarding
barricades?
You need to adjust the retiring cam on a Movement of the retiring cam must be at least 1/2 inch more than the average
new freight installation, which of the interlock movement required for normal operation
following steps would you perform? 3 multiple choice options
Which of the following describes the Non adjustable sill stop 3 multiple choice options
components that physically contacts the
landing sill at the floor to transfer the
weight of loading over the freight door
lower panel?
If you are on a freight door installation Installing an auxiliary center sill stop 3 multiple choice options
using wide panels that will be exposed to
very heavy loads and has an adjustable
sill stop, what else can be done to
prevent the lower panel from deflecting?
Which of the following statements is They can be no less than 24 sq in. and no more than 80 sq in.
correct regarding vision panels on freight
3 multiple choice options
hoistway doors?
You are adjusting the closed position gap Set the gap to at least 3/4 inch 3 multiple choice options
between the metal edges of vertically
sliding, biparting freight doors. Which of
the following statements is correct?
Based on ASME code, how much must At least 2 inches 3 multiple choice options
freight door panels overlap the sides and
top of the hoistway entrance?
When DC is injected into the stator Plugging 3 multiple choice options
windings for speed control, it is referred
to as
1/
2
PM
NEIEP 535 EXAM QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS VERIFIED
LATEST UPDATE
16 studiers in 3 days Leave the first rating
Save
When installing door panels, which of the When properly balanced, the doors will tend to open slightly
following statements is correct? 3 multiple choice options
A freight door that has two different panel Compound doors 3 multiple choice options
sizes to accommodate a shallow pit is
identified as follows
When setting up your work area for The midrail must be set to a height of 21 inches 3 multiple choice options
freight door installation, which of the
following statements is correct regarding
barricades?
You need to adjust the retiring cam on a Movement of the retiring cam must be at least 1/2 inch more than the average
new freight installation, which of the interlock movement required for normal operation
following steps would you perform? 3 multiple choice options
Which of the following describes the Non adjustable sill stop 3 multiple choice options
components that physically contacts the
landing sill at the floor to transfer the
weight of loading over the freight door
lower panel?
If you are on a freight door installation Installing an auxiliary center sill stop 3 multiple choice options
using wide panels that will be exposed to
very heavy loads and has an adjustable
sill stop, what else can be done to
prevent the lower panel from deflecting?
Which of the following statements is They can be no less than 24 sq in. and no more than 80 sq in.
correct regarding vision panels on freight
3 multiple choice options
hoistway doors?
You are adjusting the closed position gap Set the gap to at least 3/4 inch 3 multiple choice options
between the metal edges of vertically
sliding, biparting freight doors. Which of
the following statements is correct?
Based on ASME code, how much must At least 2 inches 3 multiple choice options
freight door panels overlap the sides and
top of the hoistway entrance?
When DC is injected into the stator Plugging 3 multiple choice options
windings for speed control, it is referred
to as
1/
2
