ENPHASE SOLAR PV INSTALLATION CERTIFICATION 2025 ACTUAL EXAM COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |100% GUARANTEED PASS!!

ENPHASE SOLAR PV INSTALLATION CERTIFICATION 2025 ACTUAL

EXAM COMPLETE QUESTIONS AND CORRECT DETAILED

ANSWERS (VERIFIED ANSWERS) |100% GUARANTEED PASS!!

Which component of the Ensemble system detects a grid failure?




A. Envoy




B. Enpower




C. Encharge - (ANSWER)B. Enpower




True or false: PV systems with Energy storage but without backup power do not

require Enpower. - (ANSWER)True




Where do the hot conductors between Encharge and Enpower terminate?




A. In the IQ Combiner box

,B. At the DER (distributed energy resource) input terminals




C. On the Encharge circuit breaker terminals




D. On the PV circuit breaker terminals

Clear my choice - (ANSWER)B. At the DER (distributed energy resource) input

terminals




What is the maximum amount of PV and storage that can be connected to the

Enpower smart switch?




A. 80A of PV and 80A of storage for a total of 160A




B. 80A of PV or 80A of storage for a total of 80A




C. 40A of PV and 40A of storage for a total of 80A

, D. 0A, PV and Storage is landed in a backup loads panel - (ANSWER)A. 80A of

PV and 80A of storage for a total of 160A




Do we need to install an additional service disconnect if the Enpower main service

breaker has been installed as the main service disconnect?




A. No, it is not necessary to install an additional disconnect




B. It depends on the use case




C. Yes, it has to be redundant and serve as a rapid shutdown initiation device -

(ANSWER)A. No, it is not necessary to install an additional disconnect




Why does Enpower need a Neutral Forming Transformer to operate during the grid

outage?