NC Drivers License exam 2025 with
100% correct answers
, are the areas near the left and right rear corners of the vehicle that you cannot see using the mirrors. -
correct answer blind spots
When approaching or driving through a work zone, you must not: - correct answer weave from lane to lane
On a multi-lane roundabout, if you intend to exit the roundabout less than halfway around it, use: - correct answer
the right lane
On a three-lane highway, a driver towing a trailer keeps to the right while driving because: - correct answer it is a
slow moving vehicle
The law requires use of headlights from sunset to sunrise and when visibility is - correct answer 400 feet or less.
The X-marked RR sign indicates: - correct answer you are approaching a railroad crossing
Passing is illegal on any curve or hill where the driver cannot see at least: - correct answer 500 feet ahead
When there is no traffic on both sides of the road, a turn around can be performed using - correct answer a three-
point turn
North Carolina's seat belt law requires to wear seat belts. - correct answer the driver and all
passengers
,Which of the following statements is true regarding making turns? - correct answer Start from the lane closest to
where you want to go
If there are three or more lanes going in the same direction on a highway, the are usually the
smoothest, in terms of the flow of traffic. - correct answer middle lanes
Which of the following statements is NOT correct? - correct answer Bicycles and motorcycles move slower and
stop slower than expected
Backing up is not allowed on freeways or expressways, except: - correct answer by drivers of emergency
vehicles
The distance a vehicle travels between the time the driver recognizes a problem and the time he/she applies the
brakes is known as: - correct answer The reaction distance
You must avoid while crossing railroad tracks. - correct answer Stopping or shifting gears
When making a U-turn, you must NOT: - correct answer make it on a curve in the road or near a hill
Unless otherwise posted, the acceptable speed limit in cities and towns is: - correct answer 35 mph
Flashing arrow panels may be used in work zones to: - correct answer guide drivers into the correct lane
This blue-lettered sign shows: - correct answer the direction to a hospital service
When you see a yield sign on your way or at an intersection, you must: - correct answer slow down to a
reasonable speed and yield right-of-way to all vehicles
Making U-turns is not legal in which of the following areas? - correct answer Near a crest of a hill or in a curve
At rail crossings
, On highways
Driving on the left side on a multi-lane highway is legal when you are: - correct answer Avoiding an obstruction
Passing another vehicle
Turning left
occurs on wet roads when your front tires start to ride on water instead of the road. - correct
answer Hydroplaning
The traffic striping marks of diagonal yellow lines are on streets and highways. These indicate: - correct answer
The road is narrowing
There is an obstruction on the roadway
On some roadways, some lanes reserved as 'Transit' are used for: - correct answer buses only
If a tire suddenly goes flat while driving, you must: - correct answer hold the steering wheel tightly and keep the
vehicle straight
If you are on a single or two-lane road and come to an intersection with a divided highway or a roadway with
three or more lanes, you must - correct answer yield the right-of-way to other traffic
Because of their size, trucks/buses often need to move to make right turns. - correct answer to
the left lane
If you double your speed on a highway, your braking distance increases by - correct answer four times
When there are four or more lanes with traffic moving in opposite directions, two solid yellow lines mark the: -
correct answer Center of the roadway
The best way to handle a curve is to: - correct answer slow down before entering the curve
100% correct answers
, are the areas near the left and right rear corners of the vehicle that you cannot see using the mirrors. -
correct answer blind spots
When approaching or driving through a work zone, you must not: - correct answer weave from lane to lane
On a multi-lane roundabout, if you intend to exit the roundabout less than halfway around it, use: - correct answer
the right lane
On a three-lane highway, a driver towing a trailer keeps to the right while driving because: - correct answer it is a
slow moving vehicle
The law requires use of headlights from sunset to sunrise and when visibility is - correct answer 400 feet or less.
The X-marked RR sign indicates: - correct answer you are approaching a railroad crossing
Passing is illegal on any curve or hill where the driver cannot see at least: - correct answer 500 feet ahead
When there is no traffic on both sides of the road, a turn around can be performed using - correct answer a three-
point turn
North Carolina's seat belt law requires to wear seat belts. - correct answer the driver and all
passengers
,Which of the following statements is true regarding making turns? - correct answer Start from the lane closest to
where you want to go
If there are three or more lanes going in the same direction on a highway, the are usually the
smoothest, in terms of the flow of traffic. - correct answer middle lanes
Which of the following statements is NOT correct? - correct answer Bicycles and motorcycles move slower and
stop slower than expected
Backing up is not allowed on freeways or expressways, except: - correct answer by drivers of emergency
vehicles
The distance a vehicle travels between the time the driver recognizes a problem and the time he/she applies the
brakes is known as: - correct answer The reaction distance
You must avoid while crossing railroad tracks. - correct answer Stopping or shifting gears
When making a U-turn, you must NOT: - correct answer make it on a curve in the road or near a hill
Unless otherwise posted, the acceptable speed limit in cities and towns is: - correct answer 35 mph
Flashing arrow panels may be used in work zones to: - correct answer guide drivers into the correct lane
This blue-lettered sign shows: - correct answer the direction to a hospital service
When you see a yield sign on your way or at an intersection, you must: - correct answer slow down to a
reasonable speed and yield right-of-way to all vehicles
Making U-turns is not legal in which of the following areas? - correct answer Near a crest of a hill or in a curve
At rail crossings
, On highways
Driving on the left side on a multi-lane highway is legal when you are: - correct answer Avoiding an obstruction
Passing another vehicle
Turning left
occurs on wet roads when your front tires start to ride on water instead of the road. - correct
answer Hydroplaning
The traffic striping marks of diagonal yellow lines are on streets and highways. These indicate: - correct answer
The road is narrowing
There is an obstruction on the roadway
On some roadways, some lanes reserved as 'Transit' are used for: - correct answer buses only
If a tire suddenly goes flat while driving, you must: - correct answer hold the steering wheel tightly and keep the
vehicle straight
If you are on a single or two-lane road and come to an intersection with a divided highway or a roadway with
three or more lanes, you must - correct answer yield the right-of-way to other traffic
Because of their size, trucks/buses often need to move to make right turns. - correct answer to
the left lane
If you double your speed on a highway, your braking distance increases by - correct answer four times
When there are four or more lanes with traffic moving in opposite directions, two solid yellow lines mark the: -
correct answer Center of the roadway
The best way to handle a curve is to: - correct answer slow down before entering the curve
