VA DEQ SWM INSPECTOR EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS VERIFIED

VA DEQ SWM INSPECTOR EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS VERIFIED Leave the first rating Erosion and sediment control plans and stormwater management plans SWPPP plans that must be approved Post-construction When the stormwater management plan address runoff Volume and velocity of stormwater runoff increases as natural vegetation is replaced with these surfaces. The increase in stormwater runoff leads to an increase in pollutants, such as sediment and phosphorus that are carried to waterways. Impervious cover Target pollutant in the water quality criteria Phosphorus The lower limit of the range of imperviousness that can result in stream degradation% 10% SWM regulation ensures water quantity is considered to protect against which two destructive forces? Channel erosion and flooding This increases after development because of the replacement of vegetation with impervious surfaces. A larger volume of water will travel more quickly through a stream channel, potentially causing erosion and flooding. The rate of runoff A what must be at least as stringent as the Construction GP (9VAC)? Locality VSMP ESC Plan and SWM Plan (9VAC) Plans a locality's ordinance must require to be submitted and approved. No state registration statement; no SWPPP; incomplete SWPPP; SWPPP not available for review; no approved ESC plan; failure to install stormwater management BMPs or ESCs; stormwater BMPs or erosion and sediment controls improperly installed or maintained; operation deficiencies; failure to conduct required inspections; incomplete, improper, or missed inspections Violations for which a penalty may be imposed $32500 Maximum penalty a locality can impose under the stormwater act Three years from date of project completion or state permit termination How long a locality VSMP authority must hold on to a registration statement