LEED AP ID+C Practice Test B 2025 Questions and Answers 100% Pass

LEED AP ID+C Practice Test B 2025 Questions and Answers 100% Pass After an office space was completed in June, a project team took daylight measurements in all regularly occupied spaces. Which action must occur for the project to earn EQ Credit Daylight? - A second set of measurements must be taken in October to determine compliant floor areas. What is the benefit of preparing a concept model for compliance with IP Credit Integrative Process? - It can form the basis of the preliminary energy model for a tenant-level energy simulation -When doing a tenant-level energy simulation for EA Prerequisite Option 1, teams must engage a qualified energy modeler to create a preliminary model to aid in design decisions. This model will help as long as there is time to alter the design. -The concept model prepared the project team to create the simple box energy analysis that is part of the Integrative Credit and that can be used as the basis of the preliminary model. The preliminary model analyzes building design configurations and heating and cooling load reduction strategies and is used for Option 1. Design or locate the project such that a functional entry and/or bicycle storage is within a 200-yd walking distance or bicycling distance from a bicycle network that connects to at least one of the following: - -at least 10 diverse uses 2COPYRIGHT © 2025 BY GRACE AMELIA, ALL RIGHTS RESERVED -a school or employment center, if the project total floor area is 50% or more residential -a bus rapid transit stop, light or heavy rail station, commuter rail station, or ferry terminal All destinations must be within a 3-mile bicycling distance of the project boundary. A project team is designing a tenant space in the top 3 floors of a 50-story high-rise building. WaterSense labeled fixtures and fittings are being reviewed for WE Prerequisite Indoor Water Use Reduction. What action should occur to ensure building occupants are satisfied with the fixtures and fittings? - Determining the fixtures will not have performance problems. -In high-rises and in different areas where water pressure can vary, it is important for the MEP engineer to address the delivery pressure of the water. By working with the MEP engineer and architect at the project kickoff meeting, specifications can be set so no water pressure issues occur. Which document will serve as the foundation from which all design construction, acceptance, and operational decisions are made? - Owner's Project Requirements: A written document that details the ideas, concepts, and criteria determined by the owner to be important to the success of the project. An office project in a cold climate burns natural gas on-site for heating and uses electricity from the grid in warmer seasons for cooling. Which option can be used to mitigate both Scope 1 and Scope 2 emissions? - Carbon offsets. Only carbon offsets can be used for both emission types - non-electricity and electricity. -Scope 1 emissions are direct greenhouse gas emissions from sources owned or controlled by the entity, such as emissions from fossil fuels burned on site. Scope 2 emissions are indirect greenhouse gas emissions associated with the generation of purchased electricity. 3COPYRIGHT © 2025 BY GRACE AMELIA, ALL RIGHTS RESERVED During the construction phase a contractor has painted a wall with high VOC paint. What is the process to use to correct the error or submit information to qualify for EQ Credit Low-Emitting Materials? - Include the volume of high VOC paint in both the baseline and design case VOC calculations In which LEED credit is sampling allowed? - EA Prerequisite Fundamental Commissioning and Verification -For the prerequisite, the commissioning authority may use sampling strategies for functional testing. For residential, hospital inpatients, hotel guests, prisoners, or other type of residential, what is the number of default uses per day of a water closet? - 5 uses per day An office has 6 individual workstations, 2 private offices, and a conference room. Each workstation has task lighting. Which other lighting designs are required for EQ Credit Interior Lighting? - Individual lighting in both offices and manual controls in the conference room. -Lighting control is required for the following: 90% of individual occupant spaces 100% shared multi-occupant spaces The controls must have at least 3 lighting levels. Upon which factor are sound isolation requirements dependent? - The type of occupied space and the type of space adjacent to it An office project will have a 5% energy improvement over