CSX Conductor Quiz 3 Questions And Answers
With Latest Solutions
Authorized train speed is 50 mph, your train is currently exceeding
that limit by 3mph. What action is required? - ANSWER-Direct your
locomotive operator to slow down to authorized speeds
.Authorized train speed is 50mph, your train is currently exceeding
that limit by 7mph. What action is required? - ANSWER-Direct your
locomotive operator to stop the train and report to proper authority
.How many hours is a Class 1 brake test considered "good" after your
train is off air? - ANSWER-24 Hours
.How many working air brakes must you have before performing a
Class 1 brake test? - ANSWER-Each car must apply and release
.If you retest a cars air brakes after a failed air test, how long must the
brake remain applied? - ANSWER-3 minutes
.Information regarding a previously performed brake test must be
recorded on what piece of documentation? - ANSWER-Brake Test
Certificate or BTC-168 Report
, .S/A In addition to the lead locomotive, where else are you required
to have fuzees and red flags for flagging protection? - ANSWER-1)
Shoving Platform 2) Occupied Caboose
.S/A Prior to performing a brake test, what must you make certain of?
- ANSWER-1) Air hoses are in serviceable condition and properly
connected 2) anglecocks, endcocks, and cut-out cocks are in the
proper positions
.S/A Telemetry can be used to perform an air brake test and meet 2
way communication equipped requirements when the following
conditions are met. - ANSWER-1)When the controlling locomotive has
an operative HTD and the end car a operative EOT capable of two-way
communication 2)The readout on the HTD and EOT do not differ by
more than 3 psi
.S/A Telemetry can be used to perform an air brake test and meet 2
way equipped requirement when the following conditions are met -
ANSWER-1) The controlling locomotive has and operative HTD 2)rear
car is equipped with an operative EOT capable of 2 way
communication
.S/A What must you do when the air brakes on a car fail a retest? -
ANSWER-1) At the trains originating location, set the car out 2) At an
intermediate location, once the car has been tagged and the brakes
cut-out, it may be moved to the nearest location where repairs can be
made
With Latest Solutions
Authorized train speed is 50 mph, your train is currently exceeding
that limit by 3mph. What action is required? - ANSWER-Direct your
locomotive operator to slow down to authorized speeds
.Authorized train speed is 50mph, your train is currently exceeding
that limit by 7mph. What action is required? - ANSWER-Direct your
locomotive operator to stop the train and report to proper authority
.How many hours is a Class 1 brake test considered "good" after your
train is off air? - ANSWER-24 Hours
.How many working air brakes must you have before performing a
Class 1 brake test? - ANSWER-Each car must apply and release
.If you retest a cars air brakes after a failed air test, how long must the
brake remain applied? - ANSWER-3 minutes
.Information regarding a previously performed brake test must be
recorded on what piece of documentation? - ANSWER-Brake Test
Certificate or BTC-168 Report
, .S/A In addition to the lead locomotive, where else are you required
to have fuzees and red flags for flagging protection? - ANSWER-1)
Shoving Platform 2) Occupied Caboose
.S/A Prior to performing a brake test, what must you make certain of?
- ANSWER-1) Air hoses are in serviceable condition and properly
connected 2) anglecocks, endcocks, and cut-out cocks are in the
proper positions
.S/A Telemetry can be used to perform an air brake test and meet 2
way communication equipped requirements when the following
conditions are met. - ANSWER-1)When the controlling locomotive has
an operative HTD and the end car a operative EOT capable of two-way
communication 2)The readout on the HTD and EOT do not differ by
more than 3 psi
.S/A Telemetry can be used to perform an air brake test and meet 2
way equipped requirement when the following conditions are met -
ANSWER-1) The controlling locomotive has and operative HTD 2)rear
car is equipped with an operative EOT capable of 2 way
communication
.S/A What must you do when the air brakes on a car fail a retest? -
ANSWER-1) At the trains originating location, set the car out 2) At an
intermediate location, once the car has been tagged and the brakes
cut-out, it may be moved to the nearest location where repairs can be
made
