CWB CODES AND STANDARDS (PRACTICE
TEST QUESTIONS) STUDY GUIDE REVIEW /
EXPERT VERIFIED ACTUAL QUESTIONS &
ANSWERS FOR GUARANTEED PASS | NEWEST
UPDATE, .
The AWS D1.1 Structural Welding Code-Steel Answer includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. Answer
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? Answer CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". Answer False
CSA S473 Answer includes a comprehensive fracture control plan.
Most standards are created by: Answer voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: Answer an
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? Answer Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? Answer ASME Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219.
Answer True
The function of standards can be said to: Answer Educate, simplify, certify and protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". Answer True
TEST QUESTIONS) STUDY GUIDE REVIEW /
EXPERT VERIFIED ACTUAL QUESTIONS &
ANSWERS FOR GUARANTEED PASS | NEWEST
UPDATE, .
The AWS D1.1 Structural Welding Code-Steel Answer includes welding procedure
and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. Answer
Canadian General Standards Board (CGSB)
Which Canadian standard includes ferrous and non-ferrous materials with notch
toughness and includes aluminum piping systems? Answer CSA Z662
True or false: "Provisions for pre-qualified procedures are included in CSA W59.2 and
AWS D1.2 standards/Codes for fabricating aluminum and its alloys". Answer False
CSA S473 Answer includes a comprehensive fracture control plan.
Most standards are created by: Answer voluntary efforts
In Canada, shop inspections of pressure vessels are performed by: Answer an
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1 and
CSA W47.2? Answer Welding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? Answer ASME Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-2219.
Answer True
The function of standards can be said to: Answer Educate, simplify, certify and protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". Answer True
