MTA TRAINING TEST 1 QUESTIONS AND
ANSWERS
Which protocol in IPsec provides both authentication and encryption? - Correct Answers
-Encapsulating Security Payload (ESP)
Which file resolves NetBIOS names to IP addresses? - Correct Answers -LMHOSTS
Which data transmission method uses a private tunnel over a public network? - Correct
Answers -VPN
Which two statements are true about Microsoft security zones? - Correct Answers -The
default security level for Local intranet and Trusted sites is the same. Internet Explorer
has 4 security zones.
What is the main criteria used by firewalls to filter traffic? - Correct Answers -Protocols
and Ports
You need to connect a network adapter to a switch. You need the connection to be able
to send and receive data at the same time. What type of connection should you use? -
Correct Answers -Full duplex
Your ISP recently installed a T1 line. What is max throughput of a T1 line? - Correct
Answers -1.544 Mbps
You are needing to set up a VPN between two companies that are collaborating on a
project. Which type of VPN will you set up? - Correct Answers -Site-to-Site
Which are examples of leased lines? - Correct Answers -DSL
Your purchasing department has purchased new 802.11ac wireless routers. You want
to make sure all of your wireless devices are compatible with this new router. Besides
802.11ac, which wireless standards will work with these wireless routers? - Correct
Answers -802.11n (300Mbps at 2.4 or 5GHz) and 802.11a (54 Mbps at 5GHz)
You need to connect three wireless networks together: an 802.11a, an 802.11g, and an
802.11n. Which wireless tool should you use to accomplish this task? - Correct Answers
-Wireless bridge
, Connecting several computers together in a circle without the use of a hub or switch is
using what kind of topology? - Correct Answers -Ring
In a _________ topology, every single computer is connected to every other computer
on the network. - Correct Answers -Mesh
A __________ is a device that sets up different collision domains for each device
connected to it, allowing the networked devices to run in Full Duplex without collisions. -
Correct Answers -Switch
Which role needs to be added to Windows Server 2016 in order to enable routing thru
the server? - Correct Answers -Remote Access
Which type of network cables can carry signals over the longest distances? - Correct
Answers -Single-mode fiber
You need to find the MAC address of the network adapter for the computer you are
currently working on. What command line command will give you the info you need? -
Correct Answers -ipconfig /all
You need to set up 750 computers on the same network. Which IP class is the best
option? - Correct Answers -Class B
You need to subnet a 192.168.1.0 network using a class C network. What will be the
subnet mask? - Correct Answers -255.255.255.0
You need to set up a group of IPv6 network interfaces in such a way that each packet is
delivered to each interface. You should implement a(n)
_______________ address. - Correct Answers -Multicast
Which is the local loopback address in IPv6? - Correct Answers -::1
1 Kbps equals - Correct Answers -1000 bits per second
10 Mbps - Correct Answers -10,000,000 bits per second
1 Gbps - Correct Answers -1,000,000,000 bits per second/ 1000 megabits per second
1000 Kbps - Correct Answers -1 Mbps/ 1,000,000 bits per second
E1 connections use 32 channels obtain a top speed of ____________. - Correct
Answers -2.048 Mbps
How many T1 lines are used for a full T3 connection? - Correct Answers -28 lines
ANSWERS
Which protocol in IPsec provides both authentication and encryption? - Correct Answers
-Encapsulating Security Payload (ESP)
Which file resolves NetBIOS names to IP addresses? - Correct Answers -LMHOSTS
Which data transmission method uses a private tunnel over a public network? - Correct
Answers -VPN
Which two statements are true about Microsoft security zones? - Correct Answers -The
default security level for Local intranet and Trusted sites is the same. Internet Explorer
has 4 security zones.
What is the main criteria used by firewalls to filter traffic? - Correct Answers -Protocols
and Ports
You need to connect a network adapter to a switch. You need the connection to be able
to send and receive data at the same time. What type of connection should you use? -
Correct Answers -Full duplex
Your ISP recently installed a T1 line. What is max throughput of a T1 line? - Correct
Answers -1.544 Mbps
You are needing to set up a VPN between two companies that are collaborating on a
project. Which type of VPN will you set up? - Correct Answers -Site-to-Site
Which are examples of leased lines? - Correct Answers -DSL
Your purchasing department has purchased new 802.11ac wireless routers. You want
to make sure all of your wireless devices are compatible with this new router. Besides
802.11ac, which wireless standards will work with these wireless routers? - Correct
Answers -802.11n (300Mbps at 2.4 or 5GHz) and 802.11a (54 Mbps at 5GHz)
You need to connect three wireless networks together: an 802.11a, an 802.11g, and an
802.11n. Which wireless tool should you use to accomplish this task? - Correct Answers
-Wireless bridge
, Connecting several computers together in a circle without the use of a hub or switch is
using what kind of topology? - Correct Answers -Ring
In a _________ topology, every single computer is connected to every other computer
on the network. - Correct Answers -Mesh
A __________ is a device that sets up different collision domains for each device
connected to it, allowing the networked devices to run in Full Duplex without collisions. -
Correct Answers -Switch
Which role needs to be added to Windows Server 2016 in order to enable routing thru
the server? - Correct Answers -Remote Access
Which type of network cables can carry signals over the longest distances? - Correct
Answers -Single-mode fiber
You need to find the MAC address of the network adapter for the computer you are
currently working on. What command line command will give you the info you need? -
Correct Answers -ipconfig /all
You need to set up 750 computers on the same network. Which IP class is the best
option? - Correct Answers -Class B
You need to subnet a 192.168.1.0 network using a class C network. What will be the
subnet mask? - Correct Answers -255.255.255.0
You need to set up a group of IPv6 network interfaces in such a way that each packet is
delivered to each interface. You should implement a(n)
_______________ address. - Correct Answers -Multicast
Which is the local loopback address in IPv6? - Correct Answers -::1
1 Kbps equals - Correct Answers -1000 bits per second
10 Mbps - Correct Answers -10,000,000 bits per second
1 Gbps - Correct Answers -1,000,000,000 bits per second/ 1000 megabits per second
1000 Kbps - Correct Answers -1 Mbps/ 1,000,000 bits per second
E1 connections use 32 channels obtain a top speed of ____________. - Correct
Answers -2.048 Mbps
How many T1 lines are used for a full T3 connection? - Correct Answers -28 lines
